⚡ Boospa Pumps on sale through November 2, 2026! Shop the deal
Worldwide delivery
100% compatible parts
2-year warranty (1 year for professionals)
This jet body mounts to the spa shell and accommodates LVJ jets, formerly known as LVS, from the Small 5-inch series. It is compatible with all 5-inch LVJ jets, including the Aurora, Flying, and Phantom series. It allows water and air to flow to the jet. As water flows through the jet body, it draws in air through the Venturi effect, adding bubbles to the water stream and increasing massage power.
| Category | Jet Bodies |
| LVJ / LVS Part Number | L-1008B |
| Previous Part Number | L-0177 |
| Mounting Type | Screw-In |
| Length | 134 mm |
| Height | 125 mm |
| Body Length | 132 mm |
| Face Diameter | 117.5 mm |
| Inner Face Diameter | 94 mm |
| Mounting Hole Diameter | 94–98 mm |
| External Male Thread | 20.5 mm / 11 mm |
| Internal Female Thread | 14 mm / 5.8 mm |
| Water Connection | Barbed fitting for 3/4" flexible hose |
| Air Connection | Barbed fitting for 3/8" flexible hose |
| Compatibility | All 5-inch LVJ jets, including the Aurora, Flying, and Phantom series |
| Included Components | Jet body, mounting nut, and gasket |
Check the part number on your existing jet body and verify the mounting dimensions. This model corresponds to part number L-1008B, formerly L-0085, and is designed for LVJ or LVS jets from the Small 5-inch series. The 5" LVJ jet body is a universal component designed to work with all 5-inch LVJ jets.
The jet body is secured to the spa shell using the included mounting nut and gasket. The jet then snaps into the jet body. Connect the water inlet to a 3/4" flexible hose and the air inlet to a 3/8" flexible hose.
You will receive one 5-inch LVJ jet body, one mounting nut, and one gasket.
Yes, this jet body is compatible with LVJ spa jets, formerly known as LVS, from the Small 5-inch series. Before ordering, also check for part number L-1008B or the previous part number L-0175.
The face diameter is 117.5 mm, and the mounting hole must measure between 94 and 98 mm in diameter. The jet body has an overall length of 132 mm.
The water inlet features a barbed fitting for a 3/4" flexible hose. The air inlet features a barbed fitting for a 3/8" flexible hose.
As water flows through the jet body, it draws in air through the Venturi effect. This added air creates bubbles in the water stream and increases the massage intensity.
Yes, the air inlet can be capped if you do not want to add bubbles to the water stream. In a typical spa installation, the air inlets are connected to a shared air manifold and an air control valve, allowing you to adjust the air-to-water mixture.
Free payment by credit card
Only for individuals residing in France. French PayPal account required. Payment in 4X is available subject to acceptance, for purchases from 30 € to 2 000 €. A credit is a binding commitment and must be repaid, check your ability to repay. See the 4X Payment Terms and Conditions. Credit offered by PayPal (Europe) S.à r.I. et Cie. S.C.A.. 22-24 Boulevard Royal. L-2449, Luxembourg, R.C.S. Luxembourg B 118 349, which is duly licensed as a Luxembourg credit institution and is under the prudential supervision of the Luxembourg supervisory authority, the Commission de Surveillance du Secteur Financier. This information is provided by PayPal.
