HTH Spa Flash Disinfection
To be used when filling the spa. Fights against Legionella.
- Instantly dissolving powder, leaves no residue.
- Very high average available chlorine content of 75%.
- Most concentrated hypochlorite available on the market.
- Totally free of isocyanuric acid (stabilizer).
- Compatible with all filtration equipment.
INSTRUCTIONS
Use HTH Spa Flash disinfection to eliminate all bacteria (such as Legionella) and microorganisms that may be present in the spa's water circulation system.
With each spa refill:
Start the filtration system and sprinkle 25 g (1/2 scoop) of HTH Spa Flash disinfection per m3 (1000 L) of water directly into the spa. Keep the filtration system running for 2 to 3 hours, then measure the chlorine level. Ensure it has dropped to between 3 and 5 mg/L before using the spa. Subsequently, use your usual cleaning product.
ATTENTION
Do not mix a stabilized chlorine in solid form: blue label hth spa (trichloroisocyanuric acid or sodium dichloroisocyanurate dihydrate) with a chlorine without stabilizer: red label hth spa (calcium or lithium hypochlorite).