
Suction Kit - Variable Speed Massage Pump 6 - 8 jets
Includes all the necessary parts for the first part of your massage circuit.
Simply and easily build your massage spa with our ready-to-install Boospa concrete spa kits.
The variable speed massage suction kit for 6 - 8 jets supplies 6 to 8 massage jets for a concrete spa.
The parts are made of high-quality ABS designed to seal perfectly in concrete.
It includes all the piping parts leading to the pump up to the suction drain, as well as a 3 HP variable speed pump with electronic control.
You can opt for a pneumatic control if you do not use an electronic management system to control the massage pump.
The Futura 3 massage pump incorporates innovative technology that allows it to have 3 speeds on a single-speed connection.
With each ON/OFF press, the pump changes speed and goes from a power of 0.5kW to 1.5kW and then to 2.1kW.
The 4th mode is an automatic pulsating mode.
Composition of the suction kit:
Some guidelines to follow:
- If you choose a pneumatic control kit, the pneumatic hose cannot exceed 5 meters (from the button to the NCC box)
- The suction drain must be glued and then sealed into the structure.
- To supply more than 4 jets, opt for a 6 - 8 jets suction kit
- The suction kits for massage circuits must be coupled with a hydro-massage jets kit for concrete spas.
- Part number 1: Futura 3 Pump - 3HP
- The Futura 3 pump allows the supply of 4 to 8 massage jets.
- Supplied with 50mm pipe reducer union fitting
- Can be controlled by pneumatic button with a pneumatic control kit (Sold separately)
- Single Phase Power Supply 220V
- Part number 2: 50mm ball valve
- Allows isolating the circuit to work on the pump without having to drain the circuit
- Quantity: 2
- Part number 3: 50mm straight union fitting
- Connects the wall fitting to the 50mm piping
- Quantity: 2
- Part number 4: Wall fitting
- Allows passing through the structure. It may not be long enough if using block molds. In this case, seal the wall fitting + 50mm union fitting + excess piping
- Length: 15cm
- Quantity: 2
- Part number 5: Suction drain
- Allows water suction from the pool to supply the massage pump. For 6 to 8 jets, you will need to double the suction. In the supplied kit, the suction drains screw into the nozzles where the central part needs to be removed (Recognizable by a pierced ball in its center)
- Quantity: 2
- Parts number 6 and 7: Elbows and tees
- Parts necessary for doubling the suction
- Quantity: 2 + 1
- Piping: 50mm Pipe + Blue PVC Pressure Glue
- Connects all the parts together.
- Quantity: 5 meters + 1 pot of 250mL blue glue
This is a basic suction kit, it is possible to customize the parts upon request so that the kit can meet specific needs.