Straight Connectors (page 2)
136 products
Adapter that allows reducing the diameter of your piping.
Connection: Female / Female
Orientation: 90°
Pipe Size: 1.5" (48mm)
Connection Type: Female
Pipe Diameter: 1.5" (48mm) x 1" (33mm) x 1.5" (48mm)
Connection: Female / Female
Orientation: 45°
Pipe Size: 1" (33mm)
Thread Diameter: 62 mm
Inner Diameter for Hose Connection: 48 mm or 50 mm (choose one)
Connection: Female / Female
Orientation: 90°
Pipe Size: 3/4" (27mm)
Reduction: Male 1.5" (48mm) to Male 1" (33mm)
Reduction: Male 1/2" (21mm) to Male 3/4" (20mm fits into the 3/4" hose)
Reference Wateway 419-1920
System that allows reducing pipes from 1" to 20mm.
Included: 1 tightening ring for 2" heater + its female part towards 1.5" pipe
Thread diameter: 78 mm
Female outlet diameter: 48 mm
O-ring included
Attention, the 2 screws to fix the 2 parts of the ring are not included
Gecko Reference: 52272000
Gaskets included
Reduction: Male 2" (60mm) to Male 3/4" (27mm) fits inside a 3/4" hose.
Glue parts
Male air inlet in 1"
Reduction: Male 1/2" (21mm) to Female 20mm
Allows the conversion from imperial (inch) to metric (mm) system.
Reduction: Female 1" (33mm) to Male 3/4" (27mm) fits inside a 3/4" pipe.
Reduction: Male 1.5" (48mm) to Female 1" (33mm)
Perfect for reducing piping without increasing the length of the section
Allows you to connect your Spa Power heater to the piping.
Reduction: Male 3/4" (27mm) to Male 3/8" (14.5mm) fits inside a 3/8" hose.
Female / Female
Allows connecting two 20mm pipes
To be glued with a special PVC adhesive
Female/Female
Allows connecting two 50mm pipes
To be glued with special PVC glue
Connection: Male / Female
Orientation: 90°
Pipe Dimension: 2" (60mm)
Typically found in a 1-inch (33 mm) air circuit
Connection type: female
Reference Wateway 418-1000
Made of high-quality ABS
Connection type: Female
Color: dark gray
Reference Wateway 642-3700
Connection: Male / Female
Orientation: 90°
Pipe Dimension: 2.5" (74mm) / 2" (60mm)
Connection Type: Female
Pipe Diameter: 3/4" (27mm)
Water inlet in 1.5" F (48mm interior)
Air inlet in 1/2" F (21mm interior)
Nozzle outlet in 1.5" M (48mm exterior) or in 40mm F
Allows you to mount the M7 sensor on your heater while maintaining its waterproof seal.
Connection Type: Female
Pipe Diameter: 2" (60mm) x 1.5" (48mm) x 2" (60mm)
Screws into the heater clamp ring
Waterway reference 417-4197
Made of ABS
Reduction: Male 1/2" (21mm) to Male 3/8" (14.5mm) barbed fits inside a 3/8" hose.
Reduction: Female 1.5" (48mm) to Male 3/4" (27mm)
180° Elbow 1.5'' Female / Female
Connection: Female / Female
Orientation: 180°
Pipe Size: 1.5" (48mm)
Reduction type: Male to female
Union Fitting + Heater Outlet Tightening Ring 1.5''
Thread Diameter: 62 mm
Inner Diameter for Hose Connection: 50 mm
Reduction: Male Threaded 2" (60mm) to Male 1.5" (48mm)
In ABS
Reduction: Female 1.5" (48mm) to Female 3/4" (27mm)
Connection Type: Female
Pipe Diameter: 1/2" (21mm)
Reduction: Male 50mm to Female 32mm
Waterway Reference: 413-2180
Release air from your piping by removing its cap
Diameter: 60 mm
Gasket + cap included
Connection Type: Female
Pipe Diameter: 3/4" (27mm)
Ideal for creating a bypass to achieve a venturi effect.
Jerome S.
Très bien et rapide
Alain L.
Aucun probleme
Alain L.
Aucun probleme
Mickaël S.
très bien
Mickaël S.
très bien
Fabien R.
Nickel
Dino S.
en attente d'utilisation ; bien
Angelo D.
Très bien
Xavier R.
produit livré non conforme à ma demande
Anonymous A.
Produit d'occasion et sale, pas très correct. Au prix je ne vais pas faire un retour pas le temps mais bon.
