
Venturi massage jets kit - 4 jets - concrete
Includes all the parts necessary for the completion of the second part of your massage circuit.
Simply and easily build your massage spa with our ready-to-install concrete spa kits from Boospa.
The venturi massage jets kit - 4 jets - concrete is a simple kit designed for concrete spas with a structure not exceeding 15cm.
However, it is possible to create a lost formwork for the installation of the jets and exceed the maximum indicated thickness.
Here is a photo showing the installation using a lost formwork:
The parts are made of high-quality ABS designed to be perfectly sealed in concrete.
The venturi circuit allows control of the jet power
Control the power of the hydromassage jets in your concrete spa
It is possible to control the power output of the hydromassage jets.
Control the power of the jets by venturi
What is a venturi valve? It is simply a valve that allows more or less air to enter by turning it. It will create an air intake and form a vacuum at the hydromassage jet to accelerate the flow rate.
To explain this acceleration phenomenon, we can take the example of an inverted water bottle. A picture is worth a thousand words.


Hydromassage nozzles must have 2 inputs: one for water inlet, the second for venturi air inlet. It is necessary to create an additional circuit originating from the venturi valve that will be sealed in your concrete spa
Composition of the massage jet kit:
Some guidelines to follow:
- The jet farthest from the pump cannot be more than 5 meters away from it
- The venturi valves must be located near the hydrojets they control. Max: 3 meters
- We recommend balancing the circuit well. In our case, the pump flow is divided in two to supply 2 x 2 jets
- Be careful to connect the air and water circuits to the correct connections on the hydrojets
- Make sure to use the 2 - 4 jets or 4 - 8 jets suction kits
- Part number 1: Tee 50mm
- Part number 2: Plug 50mm
- Part number 3: Hydrojets
- Allows the mixing of Air / Water. The connection of the water circuit and the venturi air circuit is made through these parts
- Quantity: 4
- Part number 4: Wall fittings
- Part number 5: Directional massage nozzles
- Part number 6: Reducing tees 50mm x 32mm
- Part number 7: Directional venturi air regulation valve
- Allows control of the amount of air injected into the hydrojets, modifying the jet massage power
- Quantity: 2
- Piping: 50mm Hose + 32mm Hose + Blue PVC pressure glue
- Connects all the parts together.
- Quantity: 5 meters (50mm) + 5 meters (32mm) + 1 pot of 250mL blue glue
This is a basic jet kit, it is possible on request to adapt the parts so that the kit can meet specific needs.