MagicVac Vacuum Cleaner for Spa or Above-Ground Pool
The MagicVac vacuum cleaner operates using the
Venturi effect. It does not require electricity, a pump, or any other external connections to suction
debris from your hot tub.
Easy to use, simply submerge it in your pool to extract
accumulated residues (dirt, small rocks, sand, etc.) from the bottom using the pressure created by the vacuum
in the water.
It is very useful for
cleaning your spa or above-ground pool, especially during winterization.
Vacuum cleaner dimensions:- Maximum length: 200 cm
- Minimum length: 134 cm
- Aluminum handle
Additional features:
| Small hole to cover with your thumb to start suction |  | Adjust the size of the telescopic aluminum handle with its ABS collar. (Maximum length: 2 m) |
 | Tank where water and debris enter. It consists of a filter and a basket to retain debris inside. |  | - Check valve: Prevents water from entering at this point but allows it to exit
- Suction head that can be removed to clean larger debris
This part of the vacuum can be unscrewed to easily access the filter. |
Instructions for using MagicVac:
- Plug the hole at the top of the aluminum bar with your thumb
- Submerge the MagicVac in the area of your spa you want to clean
- Remove your thumb so that water enters the tank with the debris
- Completely remove the tank from the water and let it empty completely
- All debris will remain trapped inside thanks to the filter and basket
- Unscrew the tank to remove the debris
- You will then have access to the filter for easy cleaning
