LX WHIRLPOOL LP150 Pump
1.5HP spa massage pump
SPECIAL OFFER: Every time you order an LP150 pump, instead, receive an LP200 pump.
Same dimensions, same footprint, same connections, but more power!
Single speed
Power 1.5 HP equivalent to 1.1 Kw
Max flow rate of 520 liters per minute
- Designed for optimal performance and flow
- 2'' (60 mm) suction and discharge diameter for increased performance and reduced noise
- IPX5 standard motor cooling for gradual temperature rise
- Thermal overload detector to preserve and extend the motor's lifespan
- Equipped with a capacitor (enables pump ignition/triggering)
- Suitable for spas and pools
| Model | Max Flow (Q) in l/min | Hmax (m) | Power
kW | Power
HP | L | Weight (kg) | Package Dim. (mm) |
| LP150 | 520 | 12 | 1.1 | 1.5HP | 382 | 12.7 | 420x235x280 |
| LP200 | 535 | 13 | 1.5 | 2HP | 382 | 12.7 | 420x235x280 |
| LP250 | 600 | 15.5 | 1.85 | 2.5HP | 382 | 14.6 | 420x235x280 |
| LP300 | 635 | 17 | 2.2 | 3 HP | 397 | 16.3 | 435x235x280 |
Technical Diagrams
Pipe Connection
Supplied with 2" (60 mm internal) outlet fittings You can also reuse your old pipe fittings if they are still functional.
If your piping differs, access our
Pump Unions and Fittings range to find the fitting that matches your piping
The pump body is adjustable to fit your piping. You can then have a left or right discharge based on your installation. Simply unscrew the 4 motor screws to turn your pump body in the desired direction. Then, replace the screws in place.
Electrical Connection
The pump comes with an AMP plug connection cable. You can keep your old cable to connect this new pump. If your plug is no longer usable, you can opt for new plugs in our
Spa Cables and Plugs section
Here are the most common plugs used in the Spa industry: |  |
| AMP Plug | J&J Plug
(PIN positions vary depending on the device) |
