All our parts for concrete spas (page 2)
130 products
Connects to the filtration pump circuit
Compatible with C-4326 / C-4950 filters
Filter included
Pipe diameter: 48mm or 50mm
Balboa Reference: 10-FS00TAHA WHT
Reference Procopi: SB-110
Small weir skimmer
Screw-in Jet
Front diameter: 96mm
Color: light gray
Manufacturer reference: G90-2AN-S
Hydro-Air Genesis pneumatic control Blower
Designed for 8 to 15 jets
Suitable for spas without electronic control box
Front diameter (ABS): 92mm
Socket connection diameter: 54mm
Ideal for concrete spas
NCC Box for 230V device
This box allows you to start or stop a device through pneumatic action.
Manufacturer's reference: G70-2HN-S
Genesis Blower with integrated heating by Hydro-Air - suitable for 8 to 15 jets
Manufacturer reference: G120-2AN-S
Hydro-Air Genesis pneumatic control blower
Suitable for 8 to 15 jets
For spas without electronic control box
Allows to control the start/stop of the pneumatic device.
Diameter: 44mm
Complete Oval Skimmer with Basket
Filtration inlet 50mm
Perfectly suited for concrete spas.
Filter not included
50mm Sealing Suction Fitting for Concrete Spa
Parts for sealing and gluing - Straight or elbow connection
50mm female water outlet
Can operate continuously.
Procopi Reference: RB309
Parts for sealing and gluing
Maximum structure thickness: 97mm
Serves as an additional jet or return for concrete kit
Connection Type: Female / Female
Pipe Diameter: 63mm
Mainly used in concrete spas
Balboa reference: 30-4531-ME
Socket for sealing - Connects in series on a massage circuit
Cable and LED bulbs included
Front diameter: 290mm
Lamp diameter: 178mm
Can run continuously.
Screw-in Jet
Front diameter: 96mm
Color: anthracite grey
Front face diameter (ABS): 90mm
Thread diameter: 63mm
Power of 3kW
Can operate continuously
Can operate continuously
Part to glue and seal - for concrete spas
With sealing flange
Inner diameter front face: 2 inches (60mm)
Total length: 250 mm
Can operate continuously
Additional Jet for Concrete and Liner Spas
Parts to seal and glue - Available in various colors
Maximum structure thickness: 25cm
Serves as an additional jet for concrete massage kit.
Parts to seal and glue
Maximum structure thickness: 25cm
Serves as an additional jet for concrete massage kit
Can operate continuously
- PROCOPI Reference: 42225704-4
- Additional massage jet for concrete spa
- Color: anthracite grey – max. structure depth: 25 cm
- Parts to be sealed and glued
Electronic LED Button for Blower, Pump, or Lighting
To be used with a Classic Line BALBOA control panel
Allows to control the start, speed, as well as stop/start of the air blower, massage pump, or lighting.
Pipe diameter: 48 mm or 50mm
Manufacturer reference: 21001-107-000
Compatible with 59mm hole
1.5" (40mm) socket
Clamping ring included
Max. flow rate: 7 m3/h for ø50mm pipes and 10 m3/h for ø60mm pipes
White ABS
Classic Line Electrical Control Box
This control box allows you to control one or two Blowers/Pumps or lighting independently.
2 Models: 1 or 2 connected devices
Front diameter: 100mm
Jet color: white
Screw-in jet
Compatible with WATERWAY skimmers
Available in 3 colors: white, gray, or black
Allows for connecting a blower to a 50mm plumbing line.
Seal and glue parts
Includes everything needed to create a hydro-massage jet with venturi.
Manufacturer's reference: G50-2HN-S
Genesis Blower with built-in Hydro-Air heating - suitable for 8 to 15 jets
NCC Box for 230V single-phase device
This box allows you to start or stop a device using pneumatic action.
Front diameter: 100mm
Jet color: black
Screw-in jet
Compatible with WATERWAY skimmers
Available in 3 colors: white, gray, or black
Compatible with Waterway skimmers (DLX, FLO PRO II, ...)
Power of 2.2kW
Can operate continuously
Water inlet in 1" F (33.5mm inside) or 40mm M
Internal thread: 63mm
Perfectly suited for concrete spas
Compatible with filter 40101 / C-4310 / PWW10 / FC-3077
Juan B.
Produit adapté à mon besoin
Alain L.
Aucun probleme
Alain L.
Aucun probleme
Alain L.
Aucun probleme
Christophe O.
Très bon service et très bon article
Christophe M.
Ras, pour remplacer la pièce d’origine
Roland N.
Pas encore installé, mais produit nickel
Gilbert G.
Pièce parfaite par rapport à la demande
Anonymous A.
Produit conforme à la description.
Remi G.
Ne convient pas car il ne déclanche pas l'interrupteur