Heater E2280-0300ET 2.8kW Connection to 3/4" piping Rarely used in Europe, except for the Jacuzzi® Miami model.
The heater is vertically mounted. Due to the small pipe diameter, it needs to be connected to a filtration system using a low-flow pump. The E10 pump from LAING seems particularly suitable for this heater.
Electrical Connection: Length: 300mm Height: 185mm
Product Reference: E2280-0300ET | Common issues with heaters:
- Overvoltage on the resistor
- Resistor overheating
- Resistor causing a short circuit
|
Pipe Connection
The heater connects directly to a 3/4" pipe (27mm outer diameter)
Supplied with a 3-inch clamping ring.
You can also reuse your old pipe fittings if they are still functional. If your piping differs, check our Fittings and Unions range to find the fitting that matches your piping.
Compatible with
Compatible with Jacuzzi® Spas control systems as well as other control systems.