Laing E10 Spa Pump - 3/4" M Fittings - 1/40HP With AMP Plug + Pressure Switch 01710-130
- 1/40HP - 60/70W
- 220 - 230V 60/50Hz
- ECM System (electromagnetic)
- Smooth suction and discharge sleeves outer diameter: 21mm
- For 3/4" piping - 27mm (outer diameter)
- To be connected with hose clamps to flexible piping (note: do not use glue)
- Can be replaced by the WE10 pump (note: when replacing a pump with another model, it is important to carefully check the dimensions of the suction and discharge hole spacing of your pump, as well as its overall size.)
Pressure switch dimensions:
- Pressure switch thread: 26mm
- Piping connection:
- 1 ribbed for 3/4" piping
- 1 smooth for 1/2" piping (inner diameter of the tee: 21mm)
References:
- Pump with AMP plug: E10-NSHNDNN2W02 (6080U0019) - DIMENSION ONE: 01512-3209U
- Pump with J&J plug: E10-NSHNNNN2W01 (6080U012)
- Pressure switch/flow switch with tee: 01710-130
Laing offers you the best circulation pumps on the market, with optimal performance and significantly reduced operating noise thanks to an electromagnetic system (ECM).
These pumps have a much longer lifespan than their competitors.
- Electromagnetic circulation pump (increased lifespan and greatly reduced noise)
- Can operate 24/7 without affecting the motor
- The quietest pump on the market (Designed for optimal performance and almost noiseless flow)
- Operates without a capacitor
- Thermal overheating detector to preserve and extend the motor's lifespan
- Equipment suitable for spas
- Very compact
| Model | Max Flow (Q) in l/min | Max Head (m) | Power W | Power HP | L | H | W | Weight (kg) | Bearing Speed (rpm) |
| E10 | 158 | 13 | 60 | 1/40 HP | 106 | 125 | 150 | 1.6Kg | 3100 r/min |
Technical Diagrams
Piping Connection
To be connected with hose clamps and flexible piping You can also reuse your old piping fittings if they are still functional.
If your piping differs, check out our
Fittings and Unions range to find the fitting that matches your piping, including clamps.
Electrical Connection
The pump comes with a connection cable and AMP Here are the most commonly used plugs in the Spa industry: |  |
| AMP Plug | J&J Plug
(PIN position varies depending on the device) |
