Low Consumption Filtration Pump for Spa - LX WE14
Silent and highly reliable, this pump is ideal for filtration and water circulation in spas 24/7.
The pipe dimensions and hydraulic performance of the LX WE14 pump are identical to those of Laing E series products.
It can therefore replace the Laing E14 pump.
The special design and material of the mechanical seal reduce crystal residue produced by disinfection products and significantly increase the pump's lifespan.
The increased motor torque reduces friction problems of the mechanical seal at startup.
Bearing lifespan is extended by using high-temperature grease.
Dimensions and specifications of the Lx Whirlpool WE14 pump
Reference
| Volts
| Hz
| Amp
| Pump Type
| Power
(HP)
| Power
(W)
| Max. Flow Rate (L/min)
|
| WE14 | 230 | 50 | 1 | Single-speed | 0.25 | 250 | 153 |
LX Whirlpool WE14 Pump Pipe Connection
Supplied with 2 outlets of 1.5" (48 mm inner diameter) You can also reuse your old pipe fittings if they are still functional.
This filtration pump has a suction/discharge thread with an outer diameter of 62 mm
If your piping differs, access our range of
Fittings and Unions to find the fitting corresponding to your piping.
The pump body is adjustable to fit your piping. You can then have a discharge on the left or right depending on your installation. Simply unscrew the 4 motor screws to turn your pump body in the desired direction. Then replace the screws in place.
LX Whirlpool WE14 Pump Electrical Connection
 | The pump comes with a connection cable and AMP plug.
Cable length: about 150 cm
|
You can keep your old cable to connect this new pump. If your plug is no longer usable, you can opt for new plugs in our
Cables and Plugs for Spas section.
