Spa Filtration Pump - JA75 Lx Whirlpool
SPECIAL OFFER: Every time you order a JA75 pump, you will receive a JA120 pump instead.
Same dimensions, same footprint, same fittings, but more power!
JA75 Pump - 0.75HP - 550 watts - 250 liters / min
- Aluminum motor chassis
- Low suction
- Single-phase pump with thermal overload protection.
- IP55 protection
- Average operating temperature: 5-50°C
- Do not exceed an external temperature of 50°C
- This pump is suitable for spas and whirlpool baths
- Possibility to connect a pneumatic button for spas without electronic control unit.
Technical Diagrams
| Model | Power (HP) | Power (W) | Max Flow (l/min) | Max Head (m) |
Pipe Connection
Supplied with 2 outlet fittings 1.5" (48mm internal)
You can also reuse your old pipe fittings if they are still functional.
Thread diameter for discharge and suction: 60mm
If your piping differs, access our range of Pump Unions and Fittings to find the fitting that matches your piping.
The pump body is adjustable to fit your piping. You can have the discharge on the left or right based on your installation. Simply unscrew the 4 motor screws to rotate your pump body in the desired direction. Then, replace the screws in place.
Electrical Connection
 | The pump comes with an AMP connection cable.
Cable length: about 150 cm |
