Spare parts (page 16)

Reference LVJ: L-2013C
Diameter of cap: 95mm
Pipe diameter: 2" (60mm)

Manufacturer reference: APR800-V2 / XS-10B
Power: 700W + 180W
Sound volume: <78dB

Manufacturer Reference: 510-1500
Filtration inlet in 1.5" (48mm)
Perfectly suited for concrete spas.
Compatible with filter 40101 / C-4310 / PWW10 / FC-3077

Front diameter: 43mm
Embedded hole diameter: 30-34mm
Ribbed air inlet for 3/8” pipe
Gasket and clamping ring included

2.5'' PVC Sleeve for spa pipe - Diameter 74 mm
Female/Female
Allows connecting two 2.5'' pipes
To be glued with special PVC glue

Control the air intake of a venturi circuit
Reference BALBOA: 10-2310
Compatible with 1 inch piping (33mm - outer diameter)

Astrel Reference: PFEAT3010000
This heater replaces the following references:
PFEAR2010000 - PFEAR2210000 - PFEAR2200000- PFEAR2000000
Power: 3000W - 240V - 50Hz - single-phase
Equipped with a double sensor for water level and temperature + flow detector
Titanium resistance

Bluetooth 5.0 Amplifier
Joyonway Reference: P50B105
Easily stream audio content from your multimedia devices (keyboard or smartphone) directly to your spa speakers
Power: 100-240V - 3A 50Hz/60Hz
Waterproof Level: IPX5
With AMP plug

Front Diameter: 57mm
Length: 72mm
Thread Diameter: 28mm
Outer Diameter of Water Inlet: 15mm
Socket not included

BALBOA Reference: 10430
7-button model

ASD AR-700 Heating Blower

Electronic LED Button for Blower, Pump, or Lighting
To be used with a Classic Line BALBOA control panel
Allows for controlling the startup, speed, as well as stopping/starting of the air blower, massage pump, or lighting.

For Duplex systems.
Compatible with Balboa GS series control boxes.
BALBOA reference: 53646 (no sticker - gray edges).

Manufacturer reference: WTC50M-C
Power: 0.35 HP – 250 watts
Maximum flow rate: 240 liters/min
Includes: 2 connectors, 2"(60 mm)
Plus: Power cable with AMP plug

Manufacturer reference: Hydroair 1023063

Power: 1.5 HP (1.3 kW) – 220–240 V, 50 Hz
Supplied with: union fittings for pump-to-pipe connection (50 mm, 60 mm, 63 mm) + AMP plug connection cable
This model replaces the ITT Hydroair Magnaflow 440 pump, as its production has been suspended

Diameter: 80 mm
Compatible with: REF-000000-10184

Front Diameter: 56mm
Length: 82mm
Thread Diameter: 28mm
Outer Diameter of Water Inlet: 16mm
Socket not included

Set of 5 LED perimeter fittings
Allows the installation of LEDs in the shell of your Spa

Opening and closing of the flow with an external mechanical ring
Connection type: Female
Pipe diameter: 3/4" (27mm)

Manufacturer part number: 50259
Compatible with BP series control boxes
With TP400W sticker - ref: 12510

Jacuzzi® Reference: 20150-001
Compatible with Jacuzzi® brand spas released after 2006 from the J-400 series
Diameter: 76 mm (3")
In gray ABS

Front Diameter: 85mm
Length: 95mm
Thread Diameter: 41mm
Outer Diameter of Water Inlet: 16mm
Socket not included