Spare parts (page 60)
3050 products
Entrance/Exit: 1.5" M/F - 8 outlets 3/4" M grooved
CMP Reference: 21133-080-000
Recess hole diameter: 11.5mm
Front diameter: 22mm
Length: 33mm
Supplied with gasket and nut
Compatibility: Limelight and Highlife HotSpring Spas
Equipped with color-coded lighting that indicates when the spa is at a set temperature or if maintenance is required
Extension cable included (2.10m)
Fixing nut and gasket included
- Second chance
Product Specificity: High front panel made of deformed aluminum
Specifications: Ø 211 mm - Height: 485 mm - Top: 55 mm male plug - Bottom: 110 mm open
- Second chance
Product Specificity: Fan cover and pre-filter missing
Specifications: 1.35 HP - 0.99 kW
Thread diameter: 3.8mm
Front diameter: 100mm
Length: 113mm
Thread diameter: 41mm
Outer diameter of water inlet: 22mm
Socket not included
Front diameter: 128mm
Length: 140mm
Thread diameter: 66mm
Outer diameter water inlet: 25mm
Socket not included
Stainless Steel Front
L-1010S Directional Jet
Front Diameter: 64mm
Length: 90mm
Screw Thread Diameter: 26mm
Outer Diameter of Water Inlet: 18mm
Socket not included
Stainless Steel + Black ABS Front
3 models with different massage styles
Stainless Steel + Black ABS Front
3 models with different massage styles
Compatible with Waterway skimmers
Available in 3 colors: white, gray, or black
LVJ Reference: L-2039
Cap Diameter: 67mm
Pipe Diameter: 1.5" (48mm)
Discharge flow rate: 30 m3/h
Suction flow rate: 5 m3/h
Screws and gaskets included
Air regulation switch (Venturi)
JACUZZI branded front panel
Suitable for 1" 33mm outer diameter hose
Jacuzzi Ref: 6541-142
- Second chance
Tested & Functional
Product Feature: slightly scratched
Characteristics: Compatible with ET-S100 systems - Lighting - ON/OFF - Blower/pump - Pump
2 connection plugs
Manufacturer reference: PLUCS2298061S
Jet type: rotating
LVJ Reference: L-2901 H
Face Diameter: 3.5" (89mm)
Water Connection: 1"
Air Connection: 1/2"
reference LVJ: L-2010
Possibility to integrate lighting
Translucent ABS
Connection 1" F (33.5mm interior)
Mounting onto the wet end – secures the inlet and outlet ports
Width: 157 mm
Internal thread diameter: 47 mm
External thread diameter: 62 mm
Compatible with DH pumps
Compatible with models: Vacanza series (2019–2024)
Caldera reference: 78844
Reference Coast Spas: CCFILT0150LCSTR
Connects to the filtration circuit
Connector type: DIN 4-pin
Cable length: approximately 30 cm
1 LED light included
Manufacturer reference: HDW-011
Length: 250 mm
Front diameter: 170 mm (H) / 345 mm (W)
Embedded/thread diameter: 115 mm (H) / 285 mm (W)
Water inlet inner diameter: 60 mm
Jet body length: 83mm
LEDs not included
Canadian Spa Reference: KK-10049
Length: 72 mm
Front Diameter: 51mm
Clip Diameter: 24 mm
Outer Diameter of Water Inlet: 15 mm
Jet Body Length: 61 mm
Length: 37 cm
Connectivity: DIN Connection
Width : 73 mm
Recess hole diameter: 53 - 58 mm
Fixing nut and gasket included
- Second chance
Product Specificity: slight wear / stickered volition
Features: Power: 2.3 kW / Current: 11 A / Maximum flow rate: 700 liters/minute
Christophe B.
Je recommande vivement
Alexandre R.
Jamais reçu
Alexandre R.
Jamais reçu
Francois S.
Dommage que les raccords ne soient pas en 50mm
Eric B.
produit conforme à mon souhait
Guy-Claude G.
bien
Eric B.
pas encore installé mais fidèle à mon ancien
Bruno M.
La pompe était très bien emballé avec des protections de qualité. Elle vient juste d etre posée, nous verrons la durée de vie🙏
Laurent B.
RAS.
KARIM M.
Pas le bon model , trop long de plus de 2 cm c inadmissible. Merci