Spare parts (page 61)
3050 products
Corresponds to parts: 17-18-23-21-24-25-26-28-33
Dimensions: Length 12 cm x Width 9 cm x Height 5 cm
Used to secure the air jet socket on the shell
Allows you to replace a lost or broken ASD AR-700 blower pad
Attaches underneath the blower
Corresponds to part number 10 in the exploded view
Flange Reference: 168-11
Front diameter: 100mm
Length: 113mm
Screw thread diameter: 41mm
Outer diameter of water inlet: 22mm
Socket not included
Embedding hole diameter: 65mm
Front diameter: 102mm
Water inlet: 3/4” barbed fitting (27mm)
Air inlet: 3/8” fitting (14.5mm)
Ring and gasket included
Stainless Steel + Black ABS Front
L-1009S Directional Jet
Front Diameter: 56mm
Length: 82mm
Thread Diameter: 28mm
Outer Diameter of Water Inlet: 16mm
Socket not included
Front diameter: 56mm
Length: 82mm
Thread diameter: 28mm
Outer diameter of the water inlet: 16mm
Socket not included
Front diameter: 64mm
Length: 90mm
Thread diameter: 26mm
Outer diameter of the water inlet: 18mm
Socket not included
Front Diameter: 64mm
Length: 90mm
Thread Diameter: 26mm
Outer Diameter of Water Inlet: 18mm
Socket not included
4.5" (118mm) Flying Series Jet
Stainless Steel / ABS Front
Various models with different massage styles
Stainless Steel + Black ABS Front
3 models with different massage styles
Parts for sealing and gluing - Available in various colors
Maximum structure thickness: 25cm
Serves as an additional jet for concrete massage kit.
Case P68B123 + keyboard PB565Plus with Wifi + Heat Pump Clim8Zone II.
- Second chance
Tested & functional
Product features : scratches on the front
Specifications : Heater Control - Blower - Pump - Lighting. Compatible with ET-S100 systems
Outer Diameter: 175mm
Compatible with Waterway Futura 3 massage pumps
Keyboard Sticker Legend MASTER SPAS
Model 8 buttons
Sensor diameter: 10 mm
Cable length: 150 mm
Manufacturer reference: 27-J0568-4S-K
Power: 3 kW
Voltage: 230 V
Manufacturer reference: RD601-10314
Color: black
To be screwed onto a compatible diverter body
LVJ Reference : L-6705 T
Jet face diameter : 7.5" (170 mm)
Cutout diameter for socket installation : 130 mm
LVJ Reference: L-2901 K
Face Diameter: 3.5" (89mm)
Water Connection: 1"
Air Connection: 1/2"
LED Adapter Cable with: 1 Din F 4-pin plug / 1 RGB F 4-pin plug / 1 RGB M 4-pin plug
Manufacturer reference: E365619
20-meter coil of 2.5" reinforced PVC flexible hose for spa
Outer diameter: 75.2 mm
Inner diameter: 65 mm
Wall thickness: 4.7 mm
Mounts onto the motor – provides support and protection for the motor block
Width: 156 mm
Thread diameter: 62 mm
Mounting hole spacing (width): 90 mm
Diagonal spacing: 125 mm
Compatible with DH pumps
Manufacturer Part Number: 50910
Facade diameter: 55 mm
Diameter of the screw pitch: 25 mm
Outside diameter Water inlet: 15 mm
Jet body length: 60 mm
No socketless socket
Model: MO-VWC100A-24
Input: 100~240VAC 50/60Hz 2.25~0.76A
Output: 24±0.5VDC/4.17A 100W Max
Connection: Male/Male
Orientation: 90°
Pipe dimension: 1" (21mm)
Input Diameter: 21mm
Outer Outlet Diameter: 11mm
CMP Reference: 21158-020-000
Manufacturer reference: 108-211
Outer dimensions: 489 x 333mm
Compatible with Maax and Vita Spa spa skimmers
Compatible with Caldera control systems
Watkins Reference: 76856
This product must be configured according to the serial number of your spa. It is prepared on order after verification, please check your information carefully before validation.
Length: 140mm
Thread Diameter: 91mm
Dimensions: 115 x 77 mm
Manufacturer Reference: 6560-837
Cables included
Entrance/Exit: 3/4" M grooved with 6 smooth 3/8" outlets
Reference: 672-7190
Compatible with 3/4" hose (outer diam.: 27mm)
Color: grey
- Second chance
Product Feature: Missing fan cover
Specifications: Power: 1.1 kW (1.25 HP) / Voltage: 5.2A / Rotation speed: 2800 rpm / Maximum flow rate: 420 liters/minute
Christophe B.
Je recommande vivement
Alexandre R.
Jamais reçu
Alexandre R.
Jamais reçu
Francois S.
Dommage que les raccords ne soient pas en 50mm
Eric B.
produit conforme à mon souhait
Guy-Claude G.
bien
Eric B.
pas encore installé mais fidèle à mon ancien
Bruno M.
La pompe était très bien emballé avec des protections de qualité. Elle vient juste d etre posée, nous verrons la durée de vie🙏
Laurent B.
RAS.
KARIM M.
Pas le bon model , trop long de plus de 2 cm c inadmissible. Merci