Spare parts (page 54)
3050 products
Stainless Steel + Black ABS Front
3 different jet models to choose from:
Directional: L-1721H; Roto: L-1722S; Twin Roto: L-1723S
Compatible with VITA SPA® control boxes.
Manufacturer reference: 01560-345-N
Width: 30cm
Color: Black ABS
LVJ Reference : L-2216
Connects to the filtration circuit – top access
Compatible with filter reference 42513 (not included)
LVJ Reference : L-2030C
Cutout diameter : 102mm
Pipe diameter : 2" (60mm)
1" female diameter, 33 mm internal
Compatible with Wellis® brand spas
1" male diameter (33 mm outer)
Suitable for 1" piping
Manufacturer reference: 828-720-030
Cap diameter: 102mm
Pipe diameter: 2" (60mm)
Hydroquip Heating Kit - 5.5 kW - 240V
Hydroquip Reference: 26-3229-2A-7T-P
Replaces references: 26-0066 and 26-0066-KIT-PS
For 3/4" (27mm) outer diameter pipes
High limit sensor + pressure switch included
Power cable and chaining cable length: 95cm and 26cm
Internal diameter inlet: 33.5mm
Outer diameter of outlets: 10.5mm
CMP reference: 21156-020-000
Diameter 1" or 33 mm interior
Suitable for piping 1" (33mm exterior)
Color: gray
6 Buttons - Flat Cord
Compatible with Caldera® spas Utopia and Paradise series from 2011 to 2012
(Tahitian, Niagara, Geneva, Cantabria, Kauai, Salina, Martinique)
Available in 7 versions: JETS 1, JETS 2, JETS 3, JETS 4, MUSIC, LIGHT, and BLOWER
Compatible with GL and BP series control boxes
Recess diameter: 31-35 mm
Front diameter: 56 mm
Gecko reference: TSC-14
Available with or without sticker
Cable Length: 4m
Compatible with Rising Dragon brand lighting
Integrated LED controller board
Connection: AC12V - 2 wires
Front diameter: 70mm
Compatible with various control systems.
S-SPA and M-SPA systems from Gecko use this heater.
ArticSpa A2360-5350ET Spa Heater
Power: 3.6Kw
For ArticSpa brand spas
48 Frame Motor
Compatible with Executive Euro 94mm - 4HP pumps
Compatible with all Balboa BP series control boxes
Compatible with Balboa CLIM8ZONE heat pump
Allows control of up to 3 pumps
Sticker not included
Allows connecting the temperature probe to the electronic board
Connection: Smooth Male/Smooth Male
Orientation: 90°
Pipe Dimension: 1" (33mm) / 1/2" (20mm)
Socket for built-in spa and whirlpool
Water inlet: 50mm
Air inlet: 32mm
Compatible fan cover for many pumps by ESPA
Outer diameter: 140mm
ESPA Reference: 10433
Manufacturer reference: 12512
Compatible with TP800 control panel
Dimensions: 250 mm x 80 mm
Connection type : Male
Pipe diameter : 3/4" hose to 3/8" hose
Reference LVJ: L-2326A
Possibility to integrate lighting in the 4 LED slots
Flexible 3/4" pipe diameter
100 m Coil – Blue Clear Flexible Spa Hose 3 x 6 mm – Transparent PVC
Outer diameter: 6 mm
Inner diameter: 3 mm
Gecko Reference: 0800-500002
Outer Diameter: 112 mm
Contains:
- Impeller
- Wear ring
Compatibility: Dimension One Spas projector body from 1990 to present
Fixing nut and gasket provided
Allows you to connect a component of your spa to the electronic board
Adaptable to units equipped with a "Mini JJ" socket
Allows you to connect a DIN plug to an RJ-11 socket
Compatible with: KL8600 / KL6600
Christophe B.
Je recommande vivement
Alexandre R.
Jamais reçu
Alexandre R.
Jamais reçu
Francois S.
Dommage que les raccords ne soient pas en 50mm
Eric B.
produit conforme à mon souhait
Guy-Claude G.
bien
Eric B.
pas encore installé mais fidèle à mon ancien
Bruno M.
La pompe était très bien emballé avec des protections de qualité. Elle vient juste d etre posée, nous verrons la durée de vie🙏
Laurent B.
RAS.
KARIM M.
Pas le bon model , trop long de plus de 2 cm c inadmissible. Merci