Spare parts (page 37)
3050 products
Versatile mastic adhesive for assembly, bonding, and sealing.
Available in 5 colors
Compatible with XP2e 1.5HP, 2HP, and 2.5HP pumps
56 frame: 104 x 148mm
Embedment hole diameter: 94mm
Front diameter: 127mm
Water inlet: 3/4” nozzle (27mm)
Air inlet: 3/8” nozzle (14.5mm)
Ring and gasket included
Diameter 1'' (33 mm interior)
2 models available (beveled and smooth)
LVJ Reference: L-2077
1" female diameter, equivalent to 33 mm interior
Suitable for 1" piping
Compatible with SP800 and SP1200 housings.
Stickers sold separately.
Available in 7 versions: JETS 1, JETS 2, JETS 3, JETS 4, MUSIC, LIGHT, and BLOWER
Compatible with GL and BP series control units
Installation diameter: 31-35 mm
Front diameter: 56 mm
Compatible with GL2000 and GL8000 control systems
Equipped with a 30A fuse
Sold with ring + gasket
Cutout diameter: 55-65mm
Stainless Steel / ABS Front
Various models with different massage styles
Dimensions: 29mm X 21mm X 13mm
Compatible with BALBOA EL and GL systems
Compatible with BALBOA HA460 pumps (22-46671 and 22-4617)
LVJ Reference : L-2032 C
1" female diameter, i.e. 33 mm inside
Suitable for 1" piping
20-meter coil of 1/2" flexible spa hose – reinforced PVC
Inner diameter: 41 mm
Outer diameter: 48.5 mm
Wall thickness: 3.6 mm
HydroQuip Reference: 26-0011-3S-K
Power: 2500 W
Current: 10.4 A
Voltage: 240 V
Single-phase - 50/60Hz
Diameter 1'' which is 33 mm interior
Suitable for 1" pipe with 33 mm outside diameter
Compatible with Niagara Dual-speed or Single-speed 2HP pumps
Reference: 1215011
Compatible with pumps with a 1" outlet (Tiny might, etc...)
Connects to a 48mm thread pitch
This complete jet includes: the LED socket (LED not included) + the 3.5" spiral jet + the clamping ring with LED housings + the seal.
Recessed hole diameter: 54-64mm
- Replacement handle for spa control valve
- Dimensions: 107 × 69 mm – Central bore: 15 mm
- Silver-grey color with "FLOW" flow direction markers
Manufacturer reference: RD601-1110
Stainless Steel / ABS Front
3 models with different massage styles
Compatible with Viper 4HP WATERWAY pumps
Front diameter: 100mm
Jet color: white
Screw-in jet
Length: 140 mm
Front diameter (ABS): 126 mm
Sleeve connection diameter: 65 mm
External diameter of water inlet: 25 mm
Socket not included
Reference Wateway 672-7900
Made of high-quality ABS
Sold without cable
One of the most common pumps used in spas sold in France and Europe
Power: 2 HP – 1500 W – 56-frame motor
Outlet fittings, connection cable, and plug not included
The box enables the power supply of LEDs at 5V
Input 12V output 5V
Outer diameter: 97mm
Dimensions: 75mm x 41mm
Front Diameter: 20mm (int.)-38mm (ext.)
Length: 64mm
Height: 32mm
Air Inlet Outer Diameter: 3/8” (10mm) smooth
Color: grey
Compatible with JAZZI POOL skimmer facades
Float not included
Compatible with many control systems.
The S-SPA and M-SPA systems from Gecko use this heater.
Diameter 1" male, outer diameter 33 mm
Compatible with VOLITION brand spas
Model: K-24 or TSC24 - 2 Pumps
Compatible with LFX Californian Dupree Bay Spas
The keypad has 1 connector, unlike the 01580-0001 which has 2
Waterway Reference 811-4000
Made in the USA
Female Amp connector to connect to a pre-wired circulation pump with an AMP plug.
Watkins Reference: DX 73539HS
Flexible tube that enables the movement of the Moto-Massage jet by combining air and water flow through a soft spine.
Length: 195 mm
Diameter: 10 mm
Luc Jean P.
Impeccable
Luc Jean P.
Content du produit
Fabrizzio D.
Ce monte en lieu et place
Christophe B.
Correspond à mes attentes
Joel P.
Remplace le jet d origine, juste un bémol le jet et moins puissant
Michael S.
Obligée de racheter
Michael S.
Obligé de racheter
Peter K.
Passt genau
Sindi K.
Immer wieder bei dieser Firma bestellen.
Michael S.
Obligé de racheter