Spare parts (page 41)
3050 products
Compatible with many control systems.
The S-SPA and M-SPA systems from Gecko use this heater.
Calspas® Reference: PLU21703629
The front is made of INOX/ABS
Gecko Reference 9920-400684
Balboa Reference: 30226
Compatible with Executive Euro pumps - WATERWAY
56 and 48 Frames - Impeller, gasket, flange seal included
Various power options available - 78mm suction and discharge
Extension cable to connect your control panel to your Balboa GL series control box
56 Frame Motor
Compatible with Executive Euro pumps - 5HP with 94mm suction.
Power: 0.25 HP - 0.18 kW
Max flow rate: 167 liters/minute
1'' 1/2 (48 mm) outlet connections included
Connection cable not provided
Transmits audio sound into your spa water
Compatible with Arcadia, Monarch, Vortex, and many other spas
Length: 112 mm
Front diameter (ABS): 100 mm
Thread diameter: 36 mm
External diameter of water inlet: 16mm
Socket not included
Brand: Coast Spas
Ref: CC6053808
Mounting hole diameter: 16 mm
Complete valve BALBOA / HYDROAIR ref. 18-4093 COALG – 2" diameter
Drilling diameter: 80 mm
Total length: 185 mm – for 2" pipes
Inner diameter of white tee: 60 mm
Valve body ref.: 31-4001
Compatible with Waterway pumps - Frame 48 Motor
Diameter: 160 mm
Waterway Reference: 805-0248
4-button model
Made of light gray ABS, White, or Stainless Steel
Visible face diameter: 131 mm
For 2.5" plumbing
This part is positioned between the heater body and the electronic plate.
Panel with illuminated Jacuzzi logo
For Jacuzzi brand J400 series
Connection: RGB - 4 wires
Front Diameter: 70mm
- Best Seller
Dimension One C3552-1 Spa Heater
Power: 2.1kW / 3.4kW / 5.5kW Depending on installation
For Dimension One brand spas
Compatible with Durajet 3HP BALBOA pumps
Compatible with Flo II 1.5HP WATERWAY pumps
LVJ Reference: L-2044
Plug Dimensions: 90mm x 57mm
Pipe Diameter: 1.5" (48mm)
Female Connection for 2" Piping
Outer diameter of 15 cm
Connection: RGB - 4 wires
Front Diameter: 70mm
Jacuzzi/Sundance Spa Heater C3226-1A
Power: 4kW
For Jacuzzi or Sundance brand spas
Manufacturer reference: 77433
Can replace keyboard 76844HS
Connection Type: Male/Female (M/M/F/F)
Pipe Diameter: 2" (60mm)
Pump support for LX Whirlpool pumps
Compatible with all TDA pumps, from TDA50 to TDA200
Attaches to the front of the pump.
Compatible with Sirem's L Series PB pumps.
3-layer PVC with polyester reinforcement
Inner diameter: 9 mm
Outer diameter: 14 mm
Wall thickness: 2.5 mm
Working pressure: 6 bar
Price per linear meter
Canadian Spa Reference: KK-10040
Length: 62mm
Front Diameter: 55mm
Clip Diameter: 24mm
Outer Diameter of Water Inlet: 15mm
Jet Body Length: 50mm
No socket included
Manufacturer reference: 72492
Dimensions: 185 x 6.5cm
Front Diameter: 130mm
Length: 130mm
Thread Diameter: 48mm
External Diameter of Water Inlet: 28mm
Socket not included
2HP: 310-4210 / 3HP: 310-4200 / 4HP: 310-4190 / 5HP: 310-4180
Reference: III-PLS-sensor
Compatible only with PEIPS® III-PLS systems
Compatible with BP series control panels.
Manufacturer's reference: 57310 (Jets1, Aux, Warm, Light, Cool, Menu).
Recommended for replacing your TP400T keypad.
Embedded hole diameter: 43mm
Front diameter: 59mm
Water inlet: ribbed fitting for 3/4” (19mm) hose
Gaskets not included
Secures your Wellis jet sockets against your spa wall
Wellis reference: AJ00156
Christophe B.
Je recommande vivement
Alexandre R.
Jamais reçu
Alexandre R.
Jamais reçu
Francois S.
Dommage que les raccords ne soient pas en 50mm
Eric B.
produit conforme à mon souhait
Guy-Claude G.
bien
Eric B.
pas encore installé mais fidèle à mon ancien
Bruno M.
La pompe était très bien emballé avec des protections de qualité. Elle vient juste d etre posée, nous verrons la durée de vie🙏
Laurent B.
RAS.
KARIM M.
Pas le bon model , trop long de plus de 2 cm c inadmissible. Merci