Spare parts (page 44)
3050 products
Includes: impeller, mechanical seal, flange gasket, screws, two flanges, and drain plug.
Compatible with Joyonway's P25B37 housing and PB553/PB554/PB555 keypads
Self-priming pump with built-in pre-filter and motor
Power: 2.0 HP – 1500 watts
Maximum flow rate: 560 liters per minute – value missing
Includes 2 fittings for 2'' (56 mm) piping
The SPP250E pump is suitable for pools with a volume between 90 and 120 m 3
Manufacturer reference: 3-LED-4-pin-DIN
Connector type: 4-pin DIN male and female
Includes 3 LED lights
Parallel wiring
WATERWAY Reference: 600-3507L
Plug Diameter: 92mm
Piping Diameter: 1" (33mm)
Length: 145 mm
Front diameter: 128 mm
Clip diameter: 39 mm
Outer diameter of water inlet: 26 mm
Jet body length: 127 mm
Socket not included
Manufacturer reference: 76845
Compatible with Tiger River and Limelight brand spas
LVJ Reference: L-2013
Plug Diameter: 95mm
Pipe Diameter: 2" (60mm)
Power of 2.2kW
Can operate continuously
Front diameter: 63mm
Length: 85mm
Thread diameter: 31mm
Outer diameter of water inlet: 18mm
Socket not included
Model: K-24 or TSC24 - Keyboard only
Compatible with LFX Californian Dupree Bay Spas
The keyboard has 1 connector, unlike the 01580-0001 which has 2
Compatible with Executive Euro pumps - WATERWAY
56 and 48 Frames - Impeller, shaft seal, flange gasket included
Various power options available - 78mm suction and discharge
Front Diameter: 64mm
Length: 90mm
Thread Diameter: 26mm
Outer Diameter of Water Inlet: 18mm
Socket not included
Female Amp plug to connect to a pre-wired dual-speed pump with an Amp plug.
Front Diameter: 114mm
Length: 132mm
Thread Diameter: 48mm
Outer Diameter of Water Inlet: 23mm
Socket not included
Front Diameter: 130mm
Length: 130mm
Thread Diameter: 48mm
Outer Diameter of Water Inlet: 28mm
Socket not included
Cover with tightening points
Gasket sold separately
Length: 112 mm
Front diameter (ABS): 85 mm
Thread diameter: 36 mm
External diameter of water inlet: 16 mm
Socket not included
3" to 1" Heater Connector
Placed at the outlet of a heater to connect a 1" hose
Hydroquip Reference: 42-2386-K
2 F outlets: 2.5" (74mm)
CMP reference: 285850-250
Very useful for any maintenance, breakdown, or leak repair.
Manufacturer Part Number : ARG-ps21gr1
Diameter : 80mm
Color : black and gray
Can control: 1 circulation pump, 3 massage pumps, 1 blower.
Compatible with heater H30-R1 or H30-R2 (without link cable)
Keypad equipped with an LCD screen
CalSpas series 5900-6000/6100 Keyboard
with sticker equipped with keys: TEMP - LIGHT - JETS - OPTION - HEAT ON - OZONE INDICATOR
CalSpas reference: ELE09200778
Replaces reference: 53850
BALBOA Reference: 11884
4-button model
Compatible with XP2e pumps 1.5HP, 2HP, and 2.5HP
56 frame: 104 x 148mm
Front Diameter: 130mm
Length: 130mm
Thread Diameter: 48mm
Outer Diameter of Water Inlet: 28mm
Socket not included
Compatible with PEIPS IV keypads
Controller Type: LED RGB 5V
Power Output: 12V or +12V 2.0A
Coast Spas Reference: CSFILT1401
Inner thread diameter: 163 mm
Outer diameter: 188 mm
Length: 190 mm
Width: 160 mm
Depth: 173 mm
Compatible with Calspas® spas
Socket not included
Manufacturer Reference: PL-SW201
Faceplate diameter: 108 mm
Mounting diameter: 102 mm
Pipe diameter: 2" (60 mm)
Compatible with Genesis blowers 500, 700, 900, and 1200 Watts
Made of high-quality ABS, USA manufacturing
Available colors: Black, White, and Gray
Front Diameter: 56mm
Length: 82mm
Thread Diameter: 28mm
Outer Diameter of Water Inlet: 16mm
Socket not included
Compatible with GECKO IN.XE control boxes and Y series
2 pump model
Housing P68B123 + keyboard PB563 PLUS
Front diameter: 5" (125mm)
Cable and rubber not included.
20-meter coil of 2" flexible spa hose – reinforced PVC
Inner diameter: 52.6 mm
Outer diameter: 60 mm
Wall thickness: 4 mm
This kit ensures the sealing of the pump body.
Christophe B.
Je recommande vivement
Alexandre R.
Jamais reçu
Alexandre R.
Jamais reçu
Francois S.
Dommage que les raccords ne soient pas en 50mm
Eric B.
produit conforme à mon souhait
Guy-Claude G.
bien
Eric B.
pas encore installé mais fidèle à mon ancien
Bruno M.
La pompe était très bien emballé avec des protections de qualité. Elle vient juste d etre posée, nous verrons la durée de vie🙏
Laurent B.
RAS.
KARIM M.
Pas le bon model , trop long de plus de 2 cm c inadmissible. Merci