Spare parts (page 14)
3050 products
Power: 1.5 HP or 1.1 kW
Outlets: 2"
Typology: Two-speed
ESPA Reference: PP04410
Threaded socket + Directional 5" jet
Embedded hole diameter: 93-95 mm
LED lights not included
Wellis® Reference: AE00530
Replaces reference: AE00286
Compatible with AKU0066 venturi valves for Wellis® spas
Front diameter: 67 mm
Electronic LED Button for Blower, Pump, or Lighting
To be used with a Classic Line BALBOA control panel
Enables control over starting, speed adjustment, and stopping/starting of the air blower, massage pump, or lighting.
Front diameter: 64mm
Length: 93mm
Screw thread diameter: 26mm
Outer diameter of water inlet: 18mm
Socket not included
Front diameter: 46 mm
Embedded hole diameter: 31-35 mm
Compatible with outer diameter 3/8" (14.50 mm) hoses
Socket included
16kg refill, stones suitable for significant temperature variations.
Transparent front
Diameter 1" male, equivalent to 33 mm outer diameter
Suitable for 1" piping
Enables the starting of a massage pump.
220/240 Volts - 50/60Hz
Available in 700W
Screw-in Jet
Procopi Reference: 42030004
Front Diameter: 96mm
Power: 1.7HP (1.25kW)
Reference Sirem: PB1C8024L1B
Delivered with threaded outlet fittings 60mm and 65mm
No connection cable or plug included
Primarily used on Aquamarine spas
Procopi Reference: 41614000
Made of UV-resistant ABS plastic
Outlet 50 or 63mm to glue
Power of 2KW or 3kW
BALBOA Reference: 54806-HEATER or 54807-HEATER
Model GPH287-120/230V-RT-L
Input: 120/230Vac, 0.33/0.20A, 50-60Hz, PF .51/54
Manufacturer Part Number: EB-1008-03
Length: 120mm
Sleeve Connection Diameter: 60mm
External Diameter of Water Inlet: 25mm
Reference Wateway 672-0410
Made of high-quality ABS
Compatible with GECKO control boxes from the IN.XE, IN.XM, IN.XM2, and Y series.
Gecko reference: 0607 - 008064
Delivered without sticker
Length: 2 meters
Set of 3 spare parts
White ABS front panel
Outer diameter: 17mm
Inner diameter: 11-12 mm
Thickness: 2.4mm
3.5" (88mm) Jet for Volition® Spas
Stainless Steel Face
Face Diameter: 88mm
Sleeve included
Reference Wateway 672-4250
Made of high-quality ABS
Allows transforming a 2-wire LED output into a 4-wire RGB output.
Manufacturer Reference: G70-2VH-S
Genesis Blower with built-in heater with Hydro-Air variable speed
for use with 8 to 10 jets - 950W
The box is connected to the electronic board and the series LED circuit.
Length: 13 cm
Compatible with 4CH-949 filters
Mainly for Asian manufactured spas
2 Available colors: Gray and Black
Available in electronic model
Power: 3 HP (2.2 kW) - 230V / 50 Hz / 11.5 A
2" (60 mm) outlet unions not included
AMP plug connection cable included
Length: 120mm
Outer diameter of water inlet: 25mm
This compression gasket ensures a watertight seal around the penetrations of your jets in the walls of your spa.
Face outer diameter: 56 mm
Thread diameter: 24 mm
Water inlet outer diameter: 14 mm
Wave-shaped Front Panel
1" Male Thread, Outer Diameter 33 mm
Suitable for 1" piping
Compatible with KL8600 and KL8800 control systems
Connects to the electronic board
This clamping gasket ensures sealing at the penetrations of your jets in the walls of your spa.
1.5-inch union fitting for spa heater
+ 1 grooved gasket included
Only suitable for Laing E14 circulation pumps.
Integrated 3kW Heater
Input: 230-240VAC 50Hz - 48A max.
Can control up to 3 pumps and/or blowers
2-inch connection
Manufacturer reference: 602-0420
Compatible with Waterway top access valves in ¾" and 1" sizes.
Compatible with Balboa systems GS520DZ, GS520SZ, GS523DZ, BP6013G2, BP6013G3, and BP2100
Electric heater equipped with a 2.0kW resistance that allows your spa to heat up more quickly.
Comes with two M7 temperature sensors and a 3-pin AMP plug.
Christophe B.
Je recommande vivement
Alexandre R.
Jamais reçu
Alexandre R.
Jamais reçu
Francois S.
Dommage que les raccords ne soient pas en 50mm
Eric B.
produit conforme à mon souhait
Guy-Claude G.
bien
Eric B.
pas encore installé mais fidèle à mon ancien
Bruno M.
La pompe était très bien emballé avec des protections de qualité. Elle vient juste d etre posée, nous verrons la durée de vie🙏
Laurent B.
RAS.
KARIM M.
Pas le bon model , trop long de plus de 2 cm c inadmissible. Merci