Manufacturer & Expert
7,000+ References
Fast Shipping
Technical assistance
All Major Brands
Spare parts (page 34)
3044 products
Astrel Reference: PFEAT2010000
2.0kW - single-phase - 240V-50Hz
This heater replaces models: PFEAR3010000 and PFEAR3200000
Features a dual sensor (hi-limit and temperature) + flow detector
Equipped with a Titanium heating element
For pipes with an outer diameter of 60mm (2")
Reference BALBOA: 4377300, 4377400, 4377500, 4377600
Compatible with Argonaut pumps (0.75, 1, 1.5, and 2HP)
Inner Diameter 2 female inlets (internal): 2" (60 mm)
Outer Diameter 2 smooth male outlets (external): 3/4" (20 mm)
Waterway Reference: 672-7920
Sold with ring + gasket
Rough hole diameter: 118mm-123mm
Wellis reference: AJ00230SET
Power: 7.2 kW
Heating element type: titanium
Max Amps: 30
Volts: 240
Single phase - 50/60Hz
Connection type: WiFi only
WiFi technology: 2.4 GHz IEEE 802.11b/g
Antenna: 5dB
Encryption: WPA/WPA2-PSK
Dimensions (LxWxH): 170 x 65 x 26mm
Approximately 2.20 meters RJ45 cable included
Compatible with SG Oceane and Ethink probes.
Length: approximately 1.5 meters
Embedded hole diameter: 55mm
Front diameter: 85mm
Water inlet: 3/4” fitting (27mm)
Air inlet: 3/8” fitting (14.5mm)
Ring and gasket included
Front Diameter: 56mm
Length: 82mm
Thread Diameter: 28mm
Outer Diameter of Water Inlet: 16mm
Socket not included
Front Diameter: 130mm
Length: 130mm
Thread Diameter: 48mm
Outer Diameter of Water Inlet: 28mm
Socket not included
Enables the circulation pump to start
Voltage: 450
ILCEA Reference: K45800
Diameter: 30mm
Height: 60mm
Easily attach your control panel to your spa shell
Dimensions: 223 x 90 mm
Double-sided adhesive fixation
Balboa Reference: 53547
Compatible with Balboa GS and GL series systems (except GS500Z)
Compatible with 2-inch hoses (outer diam.)
Drilling diameter: 80 mm
Outer diameter of 18 cm
Manufacturer reference: 25263
Compatible with 4CH-949 filters
Primarily for Asian manufactured spas
2 Available Colors: Gray and Black
LVJ Reference: L-2040
Plug Dimensions: 100mm x 63mm
Pipe Diameter: 2" (60mm)
Compatible with CALDERA control systems
Electronic board reference WATKINS: 1310701-1 or 77087
LVJ Reference: L-2013
Cap Diameter: 95mm
Pipe Diameter: 2" (60mm)
2-pump model
Front Diameter: 128mm
Length: 140mm
Thread Diameter: 66mm
Water Inlet Outer Diameter: 25mm
Socket not included
450 Watts + 300W Heating Element + Reduced Noise Option
220/240 Volts - 50/60Hz
Reference 6600-168
2 colors available
Diameter 1" equivalent to 33.5mm interior
Suitable for a 1" pipe
Outer diameter: 93mm
Made of light gray ABS, White, or Stainless Steel
Visible face diameter: 131 mm
For 2.5" plumbing
LVJ Reference: L-1703S
Front diameter: 125mm
Length: 137mm
Screw thread diameter: 48mm
Outer diameter of the water inlet: 28mm
Socket not included
Parts to seal and glue
Maximum structure thickness: 25cm
Serves as an additional jet for concrete massage kit
Allows the starting of a WIPER3 150M 2P4P pump.
This complete jet includes : 3.5" (85mm) rotating jet + socket + locking ring + gasket.
Hole diameter for installation in the spa : 55mm
Complete Spa light Ø 11.4 cm
Plug Cable Amp + 12V Bulb included
Connection: AC12V - 2 wires
Front diameter: 114mm
Drain opening and closing through an external mechanical ring
Connection Type: Female
Pipe Diameter: 1" (33mm)
Front Diameter: 110mm
Length: 113mm
Thread Diameter: 41mm
Outer Diameter Water Inlet: 23mm
Socket not included
Stainless Steel + Black ABS Front
Directional Jet L-1004S
Front diameter: 91mm
Length: 114mm
Thread diameter: 37mm
Outer diameter of water inlet: 23mm
Socket not included
Pipe diameter: 48 mm or 50mm
- PROCOPI Reference: 42225704-4
- Additional massage jet for concrete spa
- Color: anthracite grey – max. structure depth: 25 cm
- Parts to be sealed and glued
Waterway Reference: 672-1051
Diameter: 163 mm
Compatible with SP800 and SP1200 housings.
Stickers sold separately.
Recess hole diameter: 98-105mm
Front diameter: 129 mm (5 inches)
Can be used as a replacement part for any jet of similar dimensions
Compatible with Waterway pumps
Reference: 313-1400
Pressure range: between 1 and 5 PSI
Replaces 3029 and 4010 pressure switches
25A
Maurice Jean R.
Parfait
Rudy G.
Parfaitement adaptable pour mon spa calspa
Rudy G.
Adaptable à la pompe achetée . C’est parfait
Claude B.
Parfait cela correspondait parfaitement à mon besoin.
Claude B.
Parfait cela correspondait parfaitement à mon besoin.
Josef P.
Sehr Gut, passt genau . DANKE
Harold M.
Quelques défauts cosmétiques sur la pièce reçue, mais parfaitement fonctionnelle.
Herve B.
Parfait
Thérèse Marie G.
correspond a ma commande
Patrick L.
Produit conforme à l'original qui datait de 17 ans le prix est conséquent espérons qu'il fonctionne aussi longtemps que celui d'origine