Spare parts (page 35)
3050 products
Length: 112 mm
Front diameter (ABS): 100 mm
Thread diameter: 36 mm
External diameter of water inlet: 16 mm
Socket not included
LVJ Reference: L3802SB
Made of stainless steel and white ABS
Faceplate diameter: 125 mm
Supplied with clamping ring and sealing gasket.
For 2" piping
Plug Diameter: 95mm
Pipe Diameter: 2" (60mm)
Possibility to add LEDs (not included)
Connection Type: Female / Female
Pipe Diameter: 1/2" (21mm)
Complete Spa light Ø 11.4 cm
Plug Cable Amp + 12V Bulb included
Connection: AC12V - 2 wires
Front diameter: 114mm
Max. flow rate: 7 m3/h for ø50mm pipes and 10 m3/h for ø60mm pipes
White ABS
Compatible with HotSpring® spas
Compatible with SP1200 DAVEY control systems
Electronic board reference DAVEY: Q846607-2TSP
Replaces the motor of Ultra 9000 blowers from generations .... .
Allows for replacing only the defective motor instead of the entire blower.
BALBOA Reference: 1212355
Compatible with single-speed and dual-speed pumps
Front diameter: 60 mm
1-inch female outlet (33mm)
- Internal component for spa control valve
- Total length: 138 mm – Shaft diameter: 10 mm – Height: 58 mm
- Compatible with various standard valve models
Sticker for KL6600 control panel
1 pump model
Dimensions: 150 x 67 mm
Pressure range: between 1 and 5 PSI
Replaces 3029 and 4010 pressure switches
25A
Connection: RGB - 4 wires
Front diameter: 130mm
Length: 136mm
Socket connection diameter: 64mm
Rotary knob for Hotspring® and Caldera® diverter
Color: White
Replacement handle with arrow.
Reference: TBS132A
Engages when pressure is maintained
Pressure range: between 1 and 5 PSI
25A
Front diameter (ABS/Stainless steel): 101mm
Sleeve connection diameter: 55mm
Water inlet external diameter: 22mm
BALBOA Reference: 10307
4-button model
Cable Length: 1.60m
Compatible with Rising Dragon brand lighting
Front diameter: 102mm
Length: 114mm
Thread diameter: 37mm
Outer diameter of water inlet: 23mm
Socket not included
Hydroair Reference: 22-35421
Pneumatic control
Power: 0.9 HP - 220-240V 50Hz
Union pump outlet fittings 1.5" and socket not included
Connection cable provided
VitaSpa C2300-0010ET Spa Heater
Power: 3Kw
For VitaSpa brand spas
ESPAs Silen S2 75 18M Pump with Prefilter
Single speed
Power 0.75 HP equivalent to 1 kW
This tool kit will allow you to perform all sorts of repairs, from flow testing on a control system to ozone detection in your spa.
Front Diameter (Stainless Steel): 52mm
Outer Diameter of Water Inlet: 15mm
3/4HP: 91693551
Compatible with: KL8-3 / Kl8-2 / KL8300 (DIN plug)
Electronic LED Button for Blower, Pump, or Lighting
To be used with a Classic Line BALBOA control panel
Allows to control the start, speed, as well as stop/start of the air blower, massage pump, or lighting.
Front Diameter: 128mm
Length: 140mm
Thread Diameter: 66mm
Outer Diameter Water Inlet: 25mm
Socket not included
2 Lengths available: 83cm or 123cm
Series connection
Allows you to connect a circulation pump, blower, ozonator, or other device under 1300W from your spa to your IN.XM or IN.XE system.
10A max
Reference BALBOA: 4377300, 4377400, 4377500, 4377600
Compatible with Argonaut pumps (0.75, 1, 1.5, and 2HP)
For predominantly Asian manufactured spas
Color: Black ABS
Front Diameter (Stainless Steel/ABS): 101mm
Socket Connection Diameter: 55mm
Outer Diameter of Water Inlet: 22mm
Jacuzzi® Reference: 6000-363 PowerPro LX
Allows adapting the new model to sockets before 2007.
Front diameter: 128mm
Length: 140mm
Thread diameter: 66mm
Outer diameter of water inlet: 25mm
Socket not included
Compatible with WATERWAY skimmers
Available in 3 colors: white, gray, or black
1 input manifold 2" F to 2 smooth outlets 3/4"
Internal diameter input: 60mm
External diameter outlets: 20mm
CMP reference: 21130-620-100
Easily attach your control panel to your spa shell
Dimensions: 223 x 90 mm
Double-sided adhesive fixation
Christophe B.
Je recommande vivement
Alexandre R.
Jamais reçu
Alexandre R.
Jamais reçu
Francois S.
Dommage que les raccords ne soient pas en 50mm
Eric B.
produit conforme à mon souhait
Guy-Claude G.
bien
Eric B.
pas encore installé mais fidèle à mon ancien
Bruno M.
La pompe était très bien emballé avec des protections de qualité. Elle vient juste d etre posée, nous verrons la durée de vie🙏
Laurent B.
RAS.
KARIM M.
Pas le bon model , trop long de plus de 2 cm c inadmissible. Merci