Massage Pumps (page 2)

Koller Reference: 240-4643A-J

Power: 3 HP – 2200 W
Maximum flow rate: 1020 liters/min
Pipe fittings not included
Supplied with cable and AMP plug + 1 drain cap included

WATERWAY Reference: 3421621-CE

One of the most common pumps used in spas sold in France and Europe
Power: 2 HP (1.38 kW)
Normally connects to 2'' (60 mm) plumbing
Sold without fittings or cable

The most widely used pump in spas sold in France and Europe
Power: 3 HP – 2250 W – 56-frame motor
Outlet fittings and connection cable + plug not included

Koller Reference: 240-4633A-J

Power: 3 HP – 2200 W – 220-240 V 50 Hz
Maximum flow rate: 1020 liters per minute
Pipe fittings not included
Includes AMP plug + 1 drain cap

Power: 1.5 HP or 1.1 kW
Maximum flow rate 550 liters/minute
Supplied with outlet fittings (63 mm) included
Connection cable without plug not included

Gecko Reference: 08240014-8041
This Gecko pump is optimized for large spas and/or spas with many jets
Power: 3 HP – 230-240 V – 56-frame motor
Outlet fittings: 2.5" (73 mm) and connection cable + AMP plug included

This pump delivers a high flow rate with remarkable energy efficiency
Power: 1.5 HP
Maximum flow rate: 580 liters per minute
Outlet fittings: 2" (60 mm) – cable not included

Power: 3 HP (2.1 kW)
Outputs: in 2"
2" outlet connections (60 mm) - connection cable and plug not included

Gecko Reference: 0800-290001
Power: 3 HP (2.2 kW) – 220-240 V 50 Hz
Maximum flow rate: 475–975 L/min
Includes: fittings for 2" (60 mm) pipes + connection cable with AMP plug

Single speed, 2HP (1.38kW)
Connections on 78mm threaded male fittings.
The Hi Flo pump is normally connected to 2'' (60mm) piping.

• Single-speed 1.5 HP pump (≈ 1.3 kW) for spa or whirlpool bath
• Electric control with center suction – short body design for compact installation
• HydroAir reference: 22-4667

Exclusively compatible with Waterway spas
Exact replacement for the Executive Euro dual-speed 3.2HP pump
3.0HP - 2200 watts - 730 liters/min - Dual-Speed
2 fittings for 2" (60mm) external diameter piping included
External thread diameter (Suction - Discharge): 78 mm
Pump with AMP plug
Exact replacement for the WP300II - LX massage pump

Power: 1.2 HP (0.9 kW)
Maximum flow rate: 335 liters per minute
Includes: 2 outlet fittings 1.5" (48 mm) and connection cable without plug

SPECIAL OFFER: Order an EA390 and receive an EA450 instead! Same dimensions, same footprint, but more powerful!

Hydroair Reference: 22-35421
Pneumatic control
Power: 0.9 HP - 220-240V 50Hz
Union pump outlet fittings 1.5" and socket not included
Connection cable provided

Gecko Reference: 0800-290000
Power: 3 HP (2.2 kW) – 220-240 V 50 Hz
Maximum flow rate: 
Includes: fittings for 2" (60 mm) pipes + connection cable with AMP plug

• Single-speed 1.5 HP pump (≈ 1.3 kW) for spa or whirlpool bath
• Pneumatic control with center suction – short body design for compact installation
• HydroAir reference: 22-46671

• Single-speed 1.5 HP pump (≈ 1.3 kW) for spa or whirlpool bath
• Low suction – short body design for compact installation
• HydroAir reference: 22-4617

BALBOA Sequential Massage Control Box
Allows control of solenoid valves for sequential massage system
Compatible with references: 11054 and 52501

Niagara Ultimax Hydro air massage pump
(Balboa USA Group)

One of the most common pumps used in spas sold in France and Europe
Power: 2 HP – 1500 W – 56-frame motor
Outlet fittings, connection cable, and plug not included

56 frames motor.
Single speed, 2.5HP
Male threaded suction fitting diameter: 78mm (2")

Spa Massage Pump Viper, 56 frames motor.
Dual speed, 5HP
The Viper pump is typically connected to 2.5'' (74mm) plumbing.

Spa-Flo 1.5HP Dual-Speed Waterway Massage Pump

Single speed
Power 0.75 HP or 0.55 Kw
Max. flow rate: 280 L/min
SPECIAL OFFER: Order an EA320 and receive an EA350 instead! Same dimensions, same footprint, but more powerful!

SpaViper massage pump, 56 frames motor.
Single speed, 5HP
Connections on 94mm threaded male fittings not provided.
The Viper pump is normally connected to 2'' (60mm) plumbing.

Exclusively compatible with Jacuzzi spas
3.0HP - 2200 watts - 730 liters/min - Dual Speed
2 fittings for external diameter 2" (60mm) pipework included
External thread diameter (Suction - Discharge): 78 mm
Pump with AMP plug
Exact replacement for the massage pump WP300II - LX

Complete Sequential Massage System
Includes 4 sequential solenoid valves, 1 sequential control unit, and 1 sequential massage control keypad.

Power: 2HP
Outputs: 2"
Typology: Single-speed
Reference Lx Whirlpool: CM16-20-A-W-G

Power: 1kW
Typology: single speed
Reference LX Whirlpool/Wellis: BJZ150/ACM0738

Power: 3 HP
Supplied without: 2" (60 mm) outlet fittings
Connection cable: AMP plug included

Compatible with: Balboa pumps 1026110 - 1063110 - 1023110 - 1063340

Power: 3 HP (2 kW)
Max flow rate: 833 liters/min
2'' (60 mm) outlet connections included + connection cable without plug

56 Frame Pump Motor - WATERWAY
56 Frame Motor
Compatible with Waterway and Aqua-Flo pumps
Single or Dual speed - 2 and 3 HP

Product Specificity: light signs of use
Features: Power: 3HP - 2200W - 800 L/min / 2 fittings for 2" hoses included (60mm outer diameter) / Supplied with an AMP cable / Outer thread diameter (Suction - Discharge): 78 mm

Product Specificity: some signs of use
Features: Power: 5HP (3.7kW) - 15A / Maximum flow rate: 1120L/min / Supplied with 2.5" (74mm) outlet fittings + AMP plug connection cable