Spare parts (page 12)
3050 products
Waterway reference: 672-4040
2 plugs included
In gray ABS covered stainless steel, with clamping ring and gasket included.
For 2-inch (60 mm) pipes.
Connection type: female.
Heating blower CG AIR SL0 230 Volts - 50Hz - 5.5 A CG AIR Reference: SL0-6-70-230/50-B2-8 Power cable included
Reference: Q12DS-XX (depending on spa manufacturers)
Allows for detecting the presence of flow in the circulation system.
From the HRS series
Power 3KW
Pipe diameter 48mm
Embedded hole diameter: 37-45mm
Front diameter: 48mm
External water inlet diameter: 3/4” (19mm)
External air inlet diameter: 3/8” (9.5mm)
Rings (for tightening and compensation) + gasket included
LVJ Reference: L-3002-S
Made of high-quality ABS
Allows you to connect a part of your spa to the electronic board
Adaptable to boxes equipped with an "Amp" socket
Rising Dragon Reference: RD631-1071
Davey SpaPower Reference: Q3708L-10
Power Supply: 12V RGB
Front Diameter: 82mm
Cable Length: 10m
Stainless Steel Air Nozzle for Concrete Spa.
Front Diameter: 38mm
Outer Diameter of Male Connector: 33.5mm
Length: 120mm
Socket Connection Diameter: 60mm
External Diameter of Water Inlet: 25mm
Lotus shape, with ring for LED lighting
Color: Black
For Jazzi and Fonteyn Spas spas
Compatible with filters C-4326 / C-4950
Primarily for Asian-made spas
Front diameter: 86 mm
1 ribbed gasket included
Opening and closing of the flow by external mechanical ring
Connection type: Threaded male (47mm)
Pipe diameter: 1" (33mm)
LCD Screen - For electronic box KL8-2 Bluelagoon, Aquazzi, and JnJ
Compatible with JJ spas equipped with electronic boxes KL8-2 EThink
Stainless Steel / ABS Front
Various models with different massage styles
Reference Wateway 672-4680
Made of high-quality ABS
Copper Strip 30039 for BALBOA Heater
Compatible with BALBOA systems after 2008
Front diameter: 56mm
Length: 82mm
Thread diameter: 28mm
Outer diameter of water inlet: 16mm
Socket not included
Cap Diameter: 77mm
Pipe Diameter: 1.5" (48mm)
Manufacturer Reference: VW150PCR
180° Elbow 1.5'' Female / Female
Connection: Female / Female
Orientation: 180°
Pipe Size: 1.5" (48mm)
Reduction type: Male to female
Front Diameter: 56mm
Length: 82mm
Thread Diameter: 28mm
Outer Diameter of Water Inlet: 16mm
Socket not included
1/4'' Drain Plug for Gecko pump series Flo-Master XP2, Flo-Master XP2e, and Flo-Master XP3
Lotus shape, with LED lighting ring
Cap Diameter: 77mm
Pipe Diameter: 1.5" (48mm)
Compatible with filters C-4326 / C-4950
With basket
Thread diameter: 94 mm
Hose connection diameter: 74 mm
The most common pump used in spas sold in France and Europe
Power: 3.5 HP – 56 frame motor
Outlet fittings and connection cable not included – without plug
Reference Joyonway: PB555
Lens Diameter: 1" (25mm)
Length: 39mm
Drilling Diameter: 12mm
Supplied with rubber mounting
Transparent
LVJ Reference: L-2027C
Cap Diameter: 95mm
Pipe Diameter: 2" (60mm)
To be used with pneumatic blowers and pumps from the Balboa Hydroair range
Allows for controlling the start, speed, and stop of the air blower
Allows transforming a 2-wire AC12V LED output into 2 RGB DIN outputs
Reference: IL-220-16C
Connector type: AMP male
Number of pins: 4
Pins not included
Connection Type: Male / Female
Pipe Diameter: 2.5" (74mm)
Seal kit to repair leaks between the pump body and the motor
Compatible with Waterway SVL56 High Flow, Champion 56 Frame, Executive, Spa-Flo, Iron Might, Hi-Flo Side Discharge, CSA Hi-Flo Side Discharge, Center Discharge, Workman pumps.
Front diameter: 67mm
Inner diameter: 1" or 33mm
Christophe B.
Je recommande vivement
Alexandre R.
Jamais reçu
Alexandre R.
Jamais reçu
Francois S.
Dommage que les raccords ne soient pas en 50mm
Eric B.
produit conforme à mon souhait
Guy-Claude G.
bien
Eric B.
pas encore installé mais fidèle à mon ancien
Bruno M.
La pompe était très bien emballé avec des protections de qualité. Elle vient juste d etre posée, nous verrons la durée de vie🙏
Laurent B.
RAS.
KARIM M.
Pas le bon model , trop long de plus de 2 cm c inadmissible. Merci