Spare parts (page 23)
3050 products
2-pin connector to be connected to the electronic board
Front Diameter: 63mm
Length: 85mm
Thread Diameter: 31mm
Outer Diameter Water Inlet: 18mm
Socket not included
Reference LVJ: L-4723S
Length: 137mm
Front face diameter: 125mm
Thread diameter: 48mm
Outer diameter of water inlet: 28mm
Jet body length: 130 mm
Socket not included
GECKO IN.THERM Heater 2kW / 3.8kW / 4kW
Compatible with GECKO control boxes series IN.XE and IN.XM
4kW model replaced by the 3.8kW model
To be placed on the outlet of your ASD AR-700 blower
Inner diameter: 34mm
Outer diameter: 39mm
1'' diameter, equivalent to 33 mm interior
Therefore suitable for 1" pipe with 33 mm exterior diameter
The ideal solution for heating your spa
For durability, energy efficiency, and reduced environmental impact
Dimensions: 396 x 286 x 363mm
Non-reversible heat pump
Outer diameter: 106 mm
Inner diameter (front flange side): 58 mm
Front face diameter (ABS/Stainless steel): 75mm
Sleeve connection diameter: 45mm
Water inlet outer diameter: 17mm
Sleeve not included
Made of light grey ABS, White, or Stainless Steel
Visible face diameter: 131 mm
For 2" piping
Front Diameter: 85mm
Length: 95mm
Thread Diameter: 41mm
Outer Diameter Water Inlet: 16mm
Socket not included
Inner Diameter 1" (33.5mm)
LVJ Reference: L-3813S
Front Diameter: 78mm
Recess Hole Diameter: 57mm
1.5-inch Female Outlet
Front Diameter: 63mm
Length: 85mm
Thread Diameter: 31mm
Outer Diameter Water Inlet: 18mm
Socket not included
Flow Detector Q12
Reference: Q12DS-XX (varies by Spa manufacturers)
Used to detect the presence of flow in the circulation system.
Collects debris to prevent pump damage
Handle included
Power: 0.35 HP - 250 watts
Maximum flow rate: 150 liters/min
1'' 1/2 (48 mm) outlet fittings included + connection cable and AMP plug
SPECIAL OFFER: Don't wait, you will receive a TDA50 instead of your TDA35!
Diameter 1" male (33 mm outer)
Suitable for 1" piping
Front diameter: 78 mm
Embedding diameter: 53-54mm
Color: white
Manufacturer reference: 550-4050B
Dimensions: 120 x 127 x 26mm
Reference LVJ: L-2311S
Stainless Steel Front Panel
LED not included
Easily screws behind its pump body
Power: 39 W - 100-240 V - 50/60Hz
Length: 90 mm
Thread diameter of the clamping ring: 69 mm
Sold without its pump body
Embedded hole diameter: 38mm
Front diameter: 56mm
Water inlet: ribbed nozzle 3/4” (27mm)
Air inlet: smooth nozzle 3/8” (14.5mm)
Ring and seal included
Compatible with pumps and blowers with a 1" outlet (Tiny might, etc...)
Connects to a 48mm thread.
Sleeve+air jet+gasket
Embedment area diameter: 26-31mm
Air inlet outer diameter: 3/8” (10mm)
Water inlet outer diameter: 3/4” (20mm)
For spas primarily of Asian manufacture
Reference: 602-61102
Works with valve handle (Ref: A-000000-10182)
Outer diameter: 69.5 mm
Inner diameter (inlet): 20 mm
Ethink 4-Pin Plug Cable
Connection: Round LED - 4 wires
Front Diameter: 67mm
3.5-inch (90 mm) suction fitting for 1.5-inch (48mm) pipe
For massage pump suction.
Front diameter: 85mm
Length: 95mm
Thread diameter: 41mm
Outer diameter of water inlet: 16mm
Socket not included
Power: 1000 W – 220/240 Volts – 50/60 Hz
Pipe connection: 3/4"
Made in Germany
Reference LVJ: L-1701T
Length: 137mm
Face diameter: 125mm
Thread diameter: 48mm
Water inlet outer diameter: 28mm
Jet body length: 130mm
Socket not included
For Sundance spas (2005+ 880 series, 2012+ Aspen models, 2006+ Niagara J-400 series)
Allows you to connect a component of your spa to the electronic board
Compatible with units equipped with a "Mini JJ" plug
Control Box SG-0007
Capable of accommodating 3 massage pumps.
Compatible with SG - Oceane Spa control panels.
Front Diameter: 57mm
Length: 72mm
Thread Diameter: 28mm
Outer Diameter Water Inlet: 15mm
Socket not included
Front diameter: 61 mm
1-inch female outlet
BALBOA Reference: 1212235
Compatible with both single-speed and dual-speed Niagara pumps, as well as Vico Ultimax pump.
Length: 95mm
Socket connection diameter: 45mm
Embedded hole diameter: 55mm
Front diameter: 68mm
Water inlet: 3/4” (19mm) fitting
Air inlet: 3/8” (9mm) fitting
Ring and gasket included
Christophe B.
Je recommande vivement
Alexandre R.
Jamais reçu
Alexandre R.
Jamais reçu
Francois S.
Dommage que les raccords ne soient pas en 50mm
Eric B.
produit conforme à mon souhait
Guy-Claude G.
bien
Eric B.
pas encore installé mais fidèle à mon ancien
Bruno M.
La pompe était très bien emballé avec des protections de qualité. Elle vient juste d etre posée, nous verrons la durée de vie🙏
Laurent B.
RAS.
KARIM M.
Pas le bon model , trop long de plus de 2 cm c inadmissible. Merci