Manufacturer & Expert
7,000+ References
Fast Shipping
Technical assistance
All Major Brands
Spare parts (page 25)
3044 products
NCC Box for 230V device
This box allows you to start or stop a device through pneumatic action.
Socket not included
PVC Tee for 2.5-inch pipe
Connection type: Female
Pipe outer diameter: 74 mm
MSPA Reference: B9301762
The box is connected to the electronic board and the series LED circuit.
LVJ Reference : L-2307
Cable and lighting not included.
Front face : 82mm
Thread diameter : 72mm
Used for spas equipped with a circulation pump.
In black or white ABS, your choice
Outer diameter 42mm
Aromatherapy diffuser for 1.5" (48mm) piping
The diffuser includes the T-piece along with the aromatherapy body and cap (in stainless steel or gray ABS)
LVS Reference: L-2001, L-2001S
Attention, limited stock, production discontinued
Manufacturer references: E10-NSHNDNN2W02 (6080U0019) + Tee: 01710-130
Ultra silent pump
Power: 1/40HP - 60/70W - 220 - 230V 60/50Hz
Max flow rate: 158 liters/min
Connect with hose clamps and flexible piping
AMP plug + Flow Switch cable and tee included
Equipped with a 6Kw heater.
The best current control system capable of operating a variable-speed blower.
Also available in: 94mm suction
Compatible with WATERWAY Executive Euro brand pumps
Complete electronic system TP700 + BP2100 + Wifi
Includes Control Box + Keypad + Heater + Lighting
Allows for the complete replacement of an old control system.
Includes Wifi for remote control of your spa
For J-300 series (J-315, J-325, J-335, J-345, etc...)
8-pin connector
Power: 1.2 HP - 900 watts
Max flow rate: 335 liters/min
1'' 1/2 (48 mm) outlet fittings included
With connection cable and AMP plug
Compatible with Caldera® Vacanza series spas.
Replaces reference 76109 (Complete system must be replaced).
Sold with ring + gasket
Recess hole diameter: 55-65mm
4 LED periphery CATHODE cable
Manufacturer reference: MINI0-Q0034
Equipped with a 2Kw heater.
The best current control system capable of operating a variable-speed Blower.
In gray ABS.
Calspas reference: PLU21300620
WATERWAY Reference: 3421621-CE
One of the most common pumps used in spas sold in France and Europe
Power: 2 HP (1.38 kW)
Normally connects to 2'' (60 mm) plumbing
Sold without fittings or cable
Manufacturer reference: G120-2AN-S
Hydro-Air Genesis pneumatic control blower
Suitable for 8 to 15 jets
For spas without electronic control box
Flow Detector Q12
Reference: Q12DS-XX (depending on spa manufacturers)
Allows to detect the presence of flow in the circulation circuit.
Third generation of 100% color SpaTouch tactile keyboard
Compatible only with CZM8 heat pump
5-inch screen
Only compatible with older PEIPS control systems
Air Control Valve (Venturi)
Diameter 1" female, inner diameter 33 mm
Suitable for 1" plumbing
Transparent ABS front panel / White ABS knob
Allows LED lighting (LEDs not included)
Female AMP Connector Socket 2 pins
Mainly used to create an extension on a LED cable.
Available only in Black
Diameter 1" male, equivalent to 33 mm outer diameter
Suitable for 1" piping
Reference LVJ: L-2806CS
Length: 255mm
Front diameter: 365mm
Clip diameter: 33mm
Outer diameter of water inlet: 12mm
LED not included
Series connection
Attaches to the UltraBRITE integrated controller.
Total length: 125cm
Internal diameter of outlets: 26.40 mm
External (M) and internal (F) diameter of inlets: 48.50 mm
Allows for connecting a blower to a 40mm piping
Pressure-resistant
Leak-proof
Materials used: PVC+PC+ABS
Koller Reference: 240-4633A-J
Power: 3 HP – 2200 W – 220-240 V 50 Hz
Maximum flow rate: 1020 liters per minute
Pipe fittings not included
Includes AMP plug + 1 drain cap
Allows you to connect 3 single-speed massage pumps + 1 blower to your BALBOA BP2100 system
Compatible with BALBOA models: BP2100G1
Made of dark gray ABS, black, or stainless steel, with screw-on grid and sealing gasket.
For massage pump suction.
Versatile mastic adhesive for installation, adhesion, and sealing.
Available in 5 colors
The most widely used pump in spas sold in France and Europe
Power: 3 HP – 2250 W – 56-frame motor
Outlet fittings and connection cable + plug not included
Reference: ZW10S15W-Z331
Automatic, natural water purification system.
Diameter 1" male, which is 33 mm outer diameter
Suitable for 1" piping
Compatible with SP600 and SP601 DAVEY control systems
Electronic board reference DAVEY: Q846601-TSP
Front diameter: 85mm
Length: 95mm
Thread diameter: 41mm
Outer diameter water inlet: 16mm
Socket not included
Front diameter: 91mm
Length: 114mm
Thread diameter: 37mm
Outer diameter of water inlet: 23mm
Socket not included
Gecko Reference: 0800-290001
Power: 3 HP (2.2 kW) – 220-240 V 50 Hz
Maximum flow rate: 475–975 L/min
Includes: fittings for 2" (60 mm) pipes + connection cable with AMP plug
Balboa reference: 57542
Compatible with all Balboa BP series control systems
Compatible with BP2100, BP6013, and BP601 series.
Balboa Reference: 59081
Koller Reference: 240-4643A-J
Power: 3 HP – 2200 W
Maximum flow rate: 1020 liters/min
Pipe fittings not included
Supplied with cable and AMP plug + 1 drain cap included
Maurice Jean R.
Parfait
Rudy G.
Parfaitement adaptable pour mon spa calspa
Rudy G.
Adaptable à la pompe achetée . C’est parfait
Claude B.
Parfait cela correspondait parfaitement à mon besoin.
Claude B.
Parfait cela correspondait parfaitement à mon besoin.
Josef P.
Sehr Gut, passt genau . DANKE
Harold M.
Quelques défauts cosmétiques sur la pièce reçue, mais parfaitement fonctionnelle.
Herve B.
Parfait
Thérèse Marie G.
correspond a ma commande
Patrick L.
Produit conforme à l'original qui datait de 17 ans le prix est conséquent espérons qu'il fonctionne aussi longtemps que celui d'origine