Spare parts (page 29)
3050 products
Front diameter: 64mm
Length: 90mm
Thread diameter: 26mm
Outer diameter of water inlet: 18mm
Socket not included
Stainless Steel + Black ABS Front
3 models with different massage styles
Dimensions: 168mm x 70mm
3M adhesive surface
For spa owners who desire control of their spa at their fingertips.
MSPA Reference: B9301762
Compatible with Gecko control boxes series X and Y.
Stainless Steel Face
Directional Jet (non-adjustable): L-1001S
Front diameter: 64mm
Length: 90mm
Thread diameter: 26mm
External diameter of water inlet: 18mm
Socket not included
- Single-speed 1.5 HP pump (≈ 1.3 kW) for spa or whirlpool bath
- Electric control with center suction – short body design for compact installation
- HydroAir reference: 22-4667
Plug Diameter: 105 mm
Pipe Diameter: 2" (60mm)
Threaded fittings, gasket, and clamping ring included
Reference: IV-sensor
Compatible only with PEIPS® IV-PLS systems
Helps significantly reduce the operating noise of the SKH - Grino Rotamik blower.
Front diameter (ABS/Stainless steel): 52 mm
Socket fixing diameter: 24 mm
External diameter of water inlet: 15 mm
Socket not included
Size #8 - Type 32
Used on WATERWAY skimmers and pump bodies
3-button model
Power: 1 HP - 750 watts
Max flow rate: 300 liters/min
Connection to 1.5" (48mm) piping + connection cable and AMP plug provided
Made of Finnish Spruce wood
Dimensions:
Length 323 mm
Width 240 mm
Depth 80 mm
Control Box SG-0007
Capable of accommodating 3 massage pumps.
Compatible with SG - Oceane Spa control panels.
2 LED periphery cable
The cable connects to an LED controller box
Socket not included
Power: 450W
Direct import from the USA
Enables the starting of a WIPER3 150M 2P4P pump.
Exclusively compatible with Waterway spas
Exact replacement for the Executive Euro dual-speed 3.2HP pump
3.0HP - 2200 watts - 730 liters/min - Dual-Speed
2 fittings for 2" (60mm) external diameter piping included
External thread diameter (Suction - Discharge): 78 mm
Pump with AMP plug
Exact replacement for the WP300II - LX massage pump
Length: 105 mm
Front diameter: 89 mm
Thread diameter: 35 mm
Outer diameter of water inlet: 24 mm
Jet body length: 95 mm
Socket included
Can replace obsolete jets of similar dimensions
Possibility to install LED lights (not included)
Reference Balboa: 25818
Allows you to connect the control panel (TP touchpad or SpaTouch) to the Balboa BP electronic box by converting a 6-pin connection to a 4-pin connection.
This clamping ring ensures the sealing of the passages of your nozzles through the walls of your spa.
1" female diameter, equivalent to 33 mm interior
Suitable for 1" piping
Plug Diameter: 82mm
Pipe Diameter: 1.5" (48mm)
Power: 6Kw
Boospa Ref: A-000000-05923
Therm Product Ref: C3160 / C3564-1
Hydroquip Ref: 26-C3160-1S
Hotspring Ref: 73790 - 72795 - 76227
Compatible with BALBOA Argonaut pumps
Reference CMP: 23008-009-000
Ribbed end caps for 3/4 inch hoses
Compatible with Astrel control systems.
As the heater is no longer manufactured, this is an equivalent model. Its substitute product is also the 26-C3480-1-7T-K heater.
Socket not included
Compatible with Niagara Dual-Speed or Single-Speed 3HP pumps
Reference: 1215012
Front diameter: 56mm
Length: 82mm
Thread diameter: 28mm
Outer diameter of water inlet: 16mm
Socket not included.
Facilitates the startup of an Argonaut spa pump
Compatible with the following Argonaut pumps: AV50, AV75, and AV100
Part to glue and seal - for concrete spas
With sealing flange
Inner diameter front face: 2 inches (60mm)
Total length: 250 mm
Flow sensor Q-12DS-C2 + 21.50 mm barbed tee
For 3/4 inch flexible hose (outer diameter)
Cables not included
Christophe B.
Je recommande vivement
Alexandre R.
Jamais reçu
Alexandre R.
Jamais reçu
Francois S.
Dommage que les raccords ne soient pas en 50mm
Eric B.
produit conforme à mon souhait
Guy-Claude G.
bien
Eric B.
pas encore installé mais fidèle à mon ancien
Bruno M.
La pompe était très bien emballé avec des protections de qualité. Elle vient juste d etre posée, nous verrons la durée de vie🙏
Laurent B.
RAS.
KARIM M.
Pas le bon model , trop long de plus de 2 cm c inadmissible. Merci