Spare parts (page 32)
3050 products
Complete electronic system VL200 + GS501Z
Includes Control Box + Keypad + Heater + Lighting
Allows for the complete replacement of an old control system.
Compatible with Balboa GL and BP series control boxes.
Balboa reference: 52678 (without sticker).
Red 3-pin plug for Y-Class and M-Class systems
Gecko Reference: 9920-400489
For J-400 series from 2006 to 2009
For J-300 series from 2007 to 2012
For Sundance 07/2009 and newer
Facilitates the starting of a massage pump.
Plug + Gasket
Outside diameter: 8 mm
Inner diameter: 6 mm
Price per linear meter
Gecko Reference 9920-400643
The 9920-400643 sensor is now replaced by the 9920-400446 sensor
5-inch Wave-Front Suction Fitting (130 mm) for 2-inch (60mm) pipe
In gray, white, or black ABS, with screwed grid and sealing gasket.
Supplied with 2 fittings: Straight and 90° Elbow + sealing gasket and clamping ring.
Integrated LED controller board
Connection: AC12V - 2 wires
Front diameter: 130mm
Compatible with Viper 5HP WATERWAY pumps
RGB Cable to Jazzi
Allows you to convert an RGB lighting connection to a Jazzi RJ11 type connection
Compatible with ETHINK control boxes
ABS or Stainless Steel Front
Diameter 1'' which is 33 mm interior
Suitable for 1" pipe with 33 mm exterior dimensions
Equipped with a multi-speed rotary knob
Power: 9 to 63 W – 230 V – 50/60 Hz – 2 bar
Connections: smooth ¾"
Cables not included
Handle diameter: 87 mm
Embedded diameter: 53-54mm
Additional Jet for Concrete and Liner Spas
Parts to seal and glue - Available in various colors
Maximum structure thickness: 25cm
Serves as an additional jet for concrete massage kit.
UltraBRITE LEDs are 50% brighter than traditional LEDs.
Fits into a projector.
Sold with ring + gasket
These sockets are compatible with all Waterway screw-in jets
Front diameter: 91mm
Length: 114mm
Thread diameter: 37mm
Outer diameter of water inlet: 23mm
Socket not included
Sticker 01560-305 for Dimension One® keyboard
7-button model - 2 Pumps
Connection: RGB - 4 wires
Front Diameter: 65mm
Connection: Smooth Male / Smooth Male
Orientation: 90°
Pipe Dimension: 2" (60mm)
Ensures the sealing of the front and back flanges of your PB series pump from Sirem
Power supply: 12V RGB - Max 27mA
Power per LED: 0.33W
LED outer diameter: 6mm
LED wall fitting not included
Manufacturer reference: 6540-434
Compatible with SUNDANCE® spas
The box is connected to the electronic board and a LED connector.
Allows connection of up to 3 LEDs.
Only compatible with older PEIPS control systems.
Reference BALBOA: 85-3300
Compatible with Perseus 450 and HA350 pumps
Used to start the high-speed function of a Sirem pump for Aquamarine spa.
Made of ABS
Waterway Reference: 519-1600
Manufacturer reference: MINI0-Q0034
Waterway Threaded Socket of All Sizes
Sold with ring + gasket
These sockets are compatible with all Waterway threaded jets
Integrated LED controller board
Connection: AC12V - 2 wires
Front diameter: 70mm
3 Models available
Filtration outlet at 1.5" (48mm)
Compatible with 6CH-940 filters
BALBOA reference: 52501
Used in Wellis®, Aquamarine®, Portcril®, and Iberspa® spas
3 Y-shaped outlets
Connection type: Female
Outer diameter of the piping: 1" (33 mm)
In light gray ABS, White, or Stainless Steel
Visible face diameter: 131 mm
For 2" piping
Mini saw for spa plumbing
Perfectly suited for spas with limited space.
Replaceable saw blade.
Christophe B.
Je recommande vivement
Alexandre R.
Jamais reçu
Alexandre R.
Jamais reçu
Francois S.
Dommage que les raccords ne soient pas en 50mm
Eric B.
produit conforme à mon souhait
Guy-Claude G.
bien
Eric B.
pas encore installé mais fidèle à mon ancien
Bruno M.
La pompe était très bien emballé avec des protections de qualité. Elle vient juste d etre posée, nous verrons la durée de vie🙏
Laurent B.
RAS.
KARIM M.
Pas le bon model , trop long de plus de 2 cm c inadmissible. Merci