Spare parts (page 24)
3050 products
Allows compatibility between new 2-inch Rising Dragon jets and old brand sockets.
Inner diameter: 31.50 mm
Screws not included
Significantly reduces the noise of your spa pump.
Compatible with most pumps.
Front Diameter: 56mm
Length: 82mm
Thread Diameter: 28mm
Outer Diameter of Water Inlet: 16mm
Socket not included
NCC Box for 230V device
This box allows you to start or stop a device through pneumatic action.
Reference LVJ: L-1201T
Length: 94mm
Front diameter: 64mm
Thread diameter: 26mm
Water inlet outer diameter: 18mm
Jet body length: 75mm
Socket not included
Made of white ABS - Supplied with gasket
Adaptable to all threaded locking rings of 78mm.
Allows connection of 1.5'' pipes (48mm)
Reference: TBS3000A
Allows turning on/off a device.
Replaces the discontinued 5-50-2D box
Commonly found in Dynasty Spas® and Balboa Spring Lights lighting system
Balboa Reference: 20-5920
J&J Electronics Reference: JCT BOX WC-25
Manufacturer reference: F980120AM
Power: 21 W
Voltage: 230 V AC – 50 Hz
Estimated lifespan: 9,000 hours
Front Diameter (Stainless Steel/ABS): 101mm
Socket Connection Diameter: 55mm
Outer Diameter of Water Inlet: 22mm
Manufacturer references: E10-NSHNDNN2W02 (6080U0019) + Tee: 01710-130
Ultra silent pump
Power: 1/40HP - 60/70W - 220 - 230V 60/50Hz
Max flow rate: 158 liters/min
Connect with hose clamps and flexible piping
AMP plug + Flow Switch cable and tee included
Power: 0.75 HP - 550W
Max flow rate: 250 liters/min
1'' 1/2 (48 mm) outlet fittings + connection cable and AMP plug included
Equipped with a 6Kw heater.
The best current control system capable of operating a variable-speed blower.
Also available in: 94mm suction
Compatible with WATERWAY Executive Euro brand pumps
Compatible with GS and GL series control systems
Equipped with a 10A fuse
Complete electronic system TP700 + BP2100 + Wifi
Includes Control Box + Keypad + Heater + Lighting
Allows for the complete replacement of an old control system.
Includes Wifi for remote control of your spa
The most common pump used in spas sold in France and Europe
Power: 2 HP – 1500 W – 56-frame motor
Outlet fittings and connection cable + plug not included
Power: 1.2 HP - 900 watts
Max flow rate: 335 liters/min
1'' 1/2 (48 mm) outlet fittings included
With connection cable and AMP plug
Compatible with Caldera® Vacanza series spas.
Replaces reference 76109 (Complete system must be replaced).
Female Amp plug to connect to a pre-wired dual-speed pump with an Amp plug.
BALBOA reference: 53811
4 LED periphery CATHODE cable
Manufacturer reference: MINI0-Q0034
Allows you to connect your lighting to the electronic board
Adaptable to boxes equipped with a 2-pin "Amp" socket
Cable length: 1.60 meters
Compatible with Blower genesis 500, 700, 900, and 1200 Watts
Flow Detector Q12
Reference: Q12DS-XX (depending on spa manufacturers)
Allows to detect the presence of flow in the circulation circuit.
Diameter Outer: 15 mm
Inner Diameter: 10 mm
Price per linear meter
Third generation of 100% color SpaTouch tactile keyboard
Compatible only with CZM8 heat pump
5-inch screen
For spa owners who want to control their spa at their fingertips.
Only compatible with older PEIPS control systems
Compatible with Balboa GSxxx or GSxxxZ series control boxes.
Balboa reference: 55350 (keyboard with sticker).
Waterway Reference: 672-4980
Air Control Valve (Venturi)
Diameter 1" female, inner diameter 33 mm
Suitable for 1" plumbing
Transparent ABS front panel / White ABS knob
Allows LED lighting (LEDs not included)
Manufacturer's reference: G70-2HN-S
Genesis Blower with integrated heating by Hydro-Air - suitable for 8 to 15 jets
In dark gray ABS, black, or stainless steel, with screw-on grid and sealing gasket.
For massage pump suction.
The box is connected to the electronic board and the series LED circuit.
The most widely used pump in spas sold in France and Europe
Power: 3 HP – 2250 W – 56-frame motor
Outlet fittings and connection cable + plug not included
Diameter 1" male, which is 33 mm outer diameter
Suitable for 1" piping
Allows you to connect 3 single-speed massage pumps + 1 blower to your BALBOA BP2100 system
Compatible with BALBOA models: BP2100G1
Front diameter: 91mm
Length: 114mm
Thread diameter: 37mm
Outer diameter of water inlet: 23mm
Socket not included
Compatible with BP2100, BP6013, and BP601 series.
Balboa Reference: 59081
Koller Reference: 240-4643A-J
Power: 3 HP – 2200 W
Maximum flow rate: 1020 liters/min
Pipe fittings not included
Supplied with cable and AMP plug + 1 drain cap included
Front diameter: 85mm
Length: 95mm
Thread diameter: 41mm
Outer diameter water inlet: 16mm
Socket not included
Christophe B.
Je recommande vivement
Alexandre R.
Jamais reçu
Alexandre R.
Jamais reçu
Francois S.
Dommage que les raccords ne soient pas en 50mm
Eric B.
produit conforme à mon souhait
Guy-Claude G.
bien
Eric B.
pas encore installé mais fidèle à mon ancien
Bruno M.
La pompe était très bien emballé avec des protections de qualité. Elle vient juste d etre posée, nous verrons la durée de vie🙏
Laurent B.
RAS.
KARIM M.
Pas le bon model , trop long de plus de 2 cm c inadmissible. Merci