Spare parts (page 5)
3050 products
Connection type: Female / Female
Pipe diameter: 50mm
Mainly used in concrete spas
Male AMP plug / connector + 2 crimp contacts
Used to connect your spa equipment directly to your electronic board.
Commonly used in the spa industry, especially on Balboa Instruments control boxes.
Suitable for 2-inch pipes (outer diameter) Thread diameter: 78mm 1 grooved gasket included
Front diameter: 37mm
Embedded area diameter: 28mm
Outer diameter of air inlets: 3/8” (9mm) - smooth tips
Seal and socket included
This compression gasket ensures sealing at the penetrations of your jets in the walls of your spa.
Allows you to create an air/water massage jet
Water inlet: 50mm and air inlet: 32mm
Reference WATERWAY 400-9230
Adaptable to all filtration and massage pumps.
Type of connection: Male / Female
Pipe diameter: 1.5" (48mm)
Connection: Female / Female
Orientation: 90°
Pipe Dimension: 1/2" (21mm)
Power: 900 W – 220/240 Volts – 50/60 Hz
Connects to 1.5'' piping
Cable supplied without plug.
Front Diameter: 85mm
Length: 95mm
Thread Diameter: 41mm
Outer Diameter of Water Inlet: 16mm
Socket not included
2" Fitting Manifold - 4 outlets 3/4" M barbed
Made of high-quality ABS material
1 Inlet 60mm - 4 outlets for 27mm hoses
Reduction: Male 2" (60mm) to Male 1.5" (48mm)
Reference LVJ: L-5121T
Length: 80mm
Front Diameter: 57mm
Thread Diameter: 28mm
Outer Diameter of Water Inlet: 15mm
Jet Body Length: 68mm
Socket not included
Front Diameter (Stainless Steel): 127mm
Length: 120mm
Sleeve Connection Diameter: 60mm
External Diameter of Water Inlet: 25mm
This compression gasket ensures sealing at the penetrations of your jets in the walls of your spa.
Front diameter: 36mm
Recess hole diameter: 17-20mm
External diameter ribbed air inlet: 3/8” (11mm)
Socket included
Connection: Male / Female
Orientation: 90°
Pipe Dimension: 1.5" (48mm)
This complete jet includes: LED socket (LED not included) + 3.5" rotating jet + clamping ring with LED slots + gasket.
Recess hole diameter: 65-73mm
Compatible with Balboa M7 heaters and controls systems
The most common sensor
Reference: 30344
1" F/M Manifold - 12 outlets 3/8" M
LVJ Reference: L-3029
Manifold plugs included
Cable and lighting included (55 LEDs)
Multicolored light - Integrated LED controller
Spa Manifold with a 2" Female Inlet
+ 6 Male Barb Outlets for 3/4" Hose
Reference LVJ: L-3003
This manifold has one of its ends closed.
2-inch Female Plug (inner diameter 60 mm)
Used to plug a pipe or manifold with a 2-inch diameter (60 mm)
Front diameter (chrome): 56mm
Socket connection diameter: 29mm
External diameter of the water inlet: 16mm
Socket not included
Power: 4W
Compatible with some models of Jacuzzi and Sundance spas
12 male barbed outlets for 3/4-inch pipe
Length: 95mm
Sleeve Connection Diameter: 45mm
2-pin connector to be connected to the electronic board
Socket included
Reference WATERWAY 400-2017
Compatible with all filtration and massage pumps.
Allows you to connect a part of your spa to the electronic board
Adaptable to boxes equipped with an "Amp" socket
This adapter reduces a 50mm pipe to 48mm
PVC-U - Female outlets
Diameter 1'' or 33 mm interior
Used in spas from brands like Volition, JFC, and many others
Waterway Reference 672-4940
Made of high-quality ABS
Front diameter: 56mm
Length: 80mm
Thread diameter: 28mm
Outer diameter of water inlet: 16mm
Socket not included
This adapter allows you to adapt the new Rising Dragon jets to your old sockets.
This enclosure can control: 1 circulation pump or 1 ozonator, 2 dual-speed pumps or 1 dual-speed pump + 2 single-speed pumps, 2 lighting connections
Gecko reference: 0610-221045-338
Length: 120mm
Sleeve Connection Diameter: 60mm
External Diameter of Water Inlet: 25mm
Front diameter: 46 mm
Embedded hole diameter: 31-35 mm
Compatible with 3/8" outer diameter hose (14.50 mm)
Socket included
Diameter of plug: 78mm
Pipe diameter: 1.5" (48mm)
Allows you to connect a part of your spa to the electronic board
Adaptable to boxes equipped with an "Amp" socket
Christophe B.
Je recommande vivement
Alexandre R.
Jamais reçu
Alexandre R.
Jamais reçu
Francois S.
Dommage que les raccords ne soient pas en 50mm
Eric B.
produit conforme à mon souhait
Guy-Claude G.
bien
Eric B.
pas encore installé mais fidèle à mon ancien
Bruno M.
La pompe était très bien emballé avec des protections de qualité. Elle vient juste d etre posée, nous verrons la durée de vie🙏
Laurent B.
RAS.
KARIM M.
Pas le bon model , trop long de plus de 2 cm c inadmissible. Merci