Spare parts (page 6)
3050 products
Allows for replacing the lower part of the jet instead of the whole unit
Compatible with Waterway PowerStorm size jets
Waterway Reference: 218-6610
Inner thread diameter: 27 mm
Hose outlet 20mm (outer diameter)
Embedment hole diameter: 46-52mm
Front diameter: 58mm
Water inlet: 3/4” fitting (27mm)
Air inlet: 3/8” fitting (14.5mm)
Socket sold with ring and gasket
Connection Type: Male
Pipe Diameter: 3/4" (27mm)
Compatible with DXD and LX pumps released before 2018
Thread diameter: 11.5mm
Plug + Gasket
Aqua-flo reference: 92500150
Nozzle + 3.5" directional Jet
Embedment diameter: 65-73 mm LVJ Reference: L-1401T Can replace obsolete jets of similar dimensions Can accommodate LED lights (not included)
Allows to control the start/stop of the pneumatic device.
Diameter: 42mm
Compatible with Gecko 2 kW SSPA heater
Compatible with Gecko 3 kW Universal heater
Replaces the discontinued Gecko Dtec 1.8 PSI pressure switch
Front Violet or clear gray depending on availability
LED not included
Male 3/4" (27 mm) elbow fitting included
Liquid designed to seal small leaks in spa and pool water systems
Capacity: 1L
Air pump for spa
Power: 300 Watts – 0.4 HP – 220/240 Volts – 50/60Hz
Supplied with 2 rings + outlet fitting for 1'' (33.5 mm) or 32 mm outlet
Compatible with many spa brands
SPECIAL OFFER: Don't wait, you will receive an AP400 instead of your AP300!
Reduction: Male 2.5" (74mm) to Female 2" (60mm)
Balboa Hydro-air Reference 1030025
High performance and quiet operation
Power: 0.25 HP – 200 watts
Supplied without fittings
Includes connection cable + AMP connector
Made in Denmark.
Compatible with Gecko control boxes: in.xm2, in.xe, in.yt, and in.ye
Manufacturer reference: 0607-008087
Connection: Female / Female
Orientation: 90°
Pipe Size: 1.5" (48mm)
Control your spa wirelessly from anywhere with the WIFI module
Connection: Female / Female
Orientation: 90°
Pipe Size: 3/4" (27mm)
LVJ Reference: L-3009
Connects to a 3/4" (27mm) drain hose.
Opening and closing controlled by a clamping cap
Reduction: Female Threaded 1.5" (63mm) to Male Threaded 2" (78mm)
Female AMP Connector Plug
Mainly used to convert an AMP cable to Mini-JJ.
9 air passage holes
Acrylic shell drilling diameter: 26 mm
Male air inlet in 3/8"
Compatible with heaters:
Gecko 2kW SSPA
Gecko 3kW Universal
Manufacturer Reference: MA-3013LG
Recess Diameter: 76mm
Diameter: 89mm
Power: 30W
Cables not included
This part directs the flow in the diverter
Reference WATERWAY: 602-0960
Adapter that allows reducing the diameter of your piping.
Thread Diameter: 62 mm
Inner Diameter for Hose Connection: 48 mm or 50 mm (choose one)
Connection: Female / Female
Orientation: 45°
Pipe Size: 1" (33mm)
BALBOA Reference: 1031025
High performance and quiet operation
Power: 0.25 HP – 200 watts – 230 V 50 Hz
Supplied without fittings
Includes connection cable + AMP connector
Connection Type: Female
Pipe Diameter: 1.5" (48mm) x 1" (33mm) x 1.5" (48mm)
Power: 3kW
Supply: 230V AC
Perfect for replacing an old heater.
Quiet and ideal for 24/7 water filtration and circulation in spas.
Power: 220-240V – 50 Hz – 1 A – 2900 r/min
Maximum flow rate: 153 liters/min
Includes 2 fittings for 1.5'' (48.5 mm) piping + connection cable with AMP connector
It can replace the Laing E14 pump
Connects to the electrical board of the Joyonway spa control system via a two-pin connector.
Heater DH30-RI
Power 3KW
Pipe diameter 1 1/2"
Manufacturer reference: 26397
Amperage: 1/8 A
Sold individually
Wellis Reference: AJ00214
Length: 78mm
Front diameter (chrome/ABS): 56mm
Connection diameter to the socket: 28mm
Outer diameter of the water inlet: 16mm
Jet body length: 69mm
Socket not included
GECKO Reference: 06334000-2
Sundance / Jacuzzi Reference: 6500-911
Power: 1/15HP
220V - 50Hz - Single-speed
Pump inlet and outlet fittings in 2" (60mm)
Manufacturer reference: PLU2121549
Length: 72 mm
Front diameter: 51 mm
Socket connection diameter: 24.3 mm
Outer diameter of the water inlet: 15 mm
Socket not included
Christophe B.
Je recommande vivement
Alexandre R.
Jamais reçu
Alexandre R.
Jamais reçu
Francois S.
Dommage que les raccords ne soient pas en 50mm
Eric B.
produit conforme à mon souhait
Guy-Claude G.
bien
Eric B.
pas encore installé mais fidèle à mon ancien
Bruno M.
La pompe était très bien emballé avec des protections de qualité. Elle vient juste d etre posée, nous verrons la durée de vie🙏
Laurent B.
RAS.
KARIM M.
Pas le bon model , trop long de plus de 2 cm c inadmissible. Merci