Spare parts (page 8)
3050 products
Reduction: Male 1.5" (48mm) to Female 1" (33mm)
Perfect for reducing piping without increasing the length of the section
This compression gasket ensures sealing at the penetrations of your jets into the walls of your spa.
Power: 0.5 HP - 370 watts
Maximum flow rate: 180 liters/min
Outlet fittings: 1.5" (48mm) + connection cable and AMP plug included
Motor feet designed to reduce vibrations.
Corresponds to parts 56 and 57 on the exploded view.
Diameter 1'' which is 33 mm interior
Suitable for 1" pipe with 33 mm exterior
Color: black
Box end connection
Reference 6600-167
Outer diameter: 14 mm
Inner diameter: 10 mm
Price per linear meter
Capacitive touchscreen color display
Compatible with pumps:
Hi-flow, Varimax, Durajet, 103100-NHP, 1023110-NHP, Niagara, and HA440NG
BALBOA Reference: 57179 / 57329-03
Second generation of the 100% touch SpaTouch color keypad
Compatible with BP series BALBOA systems
Plug diameter: 95mm
Pipe diameter: 2" (60mm)
For mainly Asian manufactured spas
Diameter 1'' or 33 mm interior
Suitable for 1" pipe with 33 mm exterior
Allows you to connect your Spa Power heater to the piping.
Allows for efficient installation of your seal kits to maintain a perfect seal.
Single-use
Attention: this board is the spa's motherboard and is located in the motor block. It is not the one located under the control panel.
Reduction: Female 1" (33mm) to Male 3/4" (27mm) fits inside a 3/4" pipe.
For spas mainly of Asian manufacture
Stainless steel facade
Cluster jets come with a specific socket.
Diameter: 92mm
2 central fixing screws
ESP 10464 + 10463 + 350 reference
Compatible with all massage pumps from ESPA brands
Connection: Male / Female
Orientation: 90°
Pipe Dimension: 2" (60mm)
Included: ABS socket + 3.5" directional Jet in Stainless Steel/ABS
Embedding hole diameter: 64-73 mm
KL8300 Electronic Control Unit.
Capable of accommodating up to 3 massage pumps.
Compatible with KL8-3 control panels.
Only compatible with a JazziPool control unit that has these connections.
Reference BALBOA: 25662-1
Length: 7.5 meters
Manufacturer reference: 715-1001
LVJ Reference: L-3035
Inner (F) and outer (M) diameter of inlets: 33.50 mm
Outer diameter of the 6 male outlets: 11 mm
Manifold plugs included
Outer diameter: 29mm
Compatible with UV systems PP-I - WONDER
This control box can manage: 1 circulation pump, 3 single or dual-speed pumps, 1 blower, 1 ozonator, 1 light, 1 audio system.
Reference BALBOA: 28317, 57254.08 (formerly 52755-06)
Third generation SpaTouch color touchscreen keypad
Compatible with BP BALBOA series systems
5-inch screen
Ribbed outlets - Mainly used in blower circuits
Manifold 1"F - 10 outlets 3/8" M with its non-return valve
Stainless steel front panel
6 LED compartments (LEDs not included)
Ribbed 90° elbow included
Hydroair Reference: 1023024
Power: 1.5 HP (1.3 kW) – 220-240V 50Hz
Supplied with piping fittings + connection cable with AMP connector
This model replaces the ITT Hydroair Magnaflow 440 pump, as its production has been discontinued
Reduction: Male 3/4" (27mm) to Male 3/8" (14.5mm) fits inside a 3/8" hose.
For flange reference B436-10
Female/Female
Allows connecting two 50mm pipes
To be glued with special PVC glue
Front diameter: 92mm
Female outlet in 1.5 inches (48mm inner diameter)
Christophe B.
Je recommande vivement
Alexandre R.
Jamais reçu
Alexandre R.
Jamais reçu
Francois S.
Dommage que les raccords ne soient pas en 50mm
Eric B.
produit conforme à mon souhait
Guy-Claude G.
bien
Eric B.
pas encore installé mais fidèle à mon ancien
Bruno M.
La pompe était très bien emballé avec des protections de qualité. Elle vient juste d etre posée, nous verrons la durée de vie🙏
Laurent B.
RAS.
KARIM M.
Pas le bon model , trop long de plus de 2 cm c inadmissible. Merci