Manufacturer & Expert
7,000+ References
Fast Shipping
Technical assistance
All Major Brands
Spare parts (page 51)
3044 products
Reference: 36602
Compatible with Hotspring® spas manufactured before 2002
Front diameter: 110mm
Length: 113mm
Thread diameter: 41mm
Outer diameter of water inlet: 23mm
Socket not included
Compatible with GECKO IN.XE control boxes and Y series
2 pump model
For Duplex systems.
Compatible with Balboa GSxxx or GSxxxZ series control boxes.
Balboa Reference: 51876 (keyboard without sticker).
Complete Sequential Massage System
Includes 4 sequential solenoid valves, 1 sequential control unit, and 1 sequential massage control keypad.
Hydroquip 4kW Universal Heater
Compatible with many control systems.
Replaces reference: C2400-5003
S-SPA and M-SPA Gecko systems use this heater.
Compatible with: DXD-310A, DXD-310C, DXD-310D, DXD-310B, DXD-310X, DXD-310Y, and DXD-310Z.
Recess hole diameter: 11.5mm
Front diameter: 22mm
Length: 33mm
Supplied with gasket and nut
Single-phase - IPX4 - 25Amps - 220-240V - 50/60Hz
Controls up to 5 pumps
Power cable not included
Cap diameter: 93 mm
Pipe diameter: 2" (60 mm)
Embedded hole diameter: 84 mm
Sold without handle
Diameter of no screws: 17 mm
Connect a hose to a GARDENA® Drain connection
In Black ABS, with screw-on grid and sealing gasket.
Connects to a 3/4" piping (27 mm outer diameter)
Grey version not available
Front Diameter: 110mm
Length: 113mm
Thread Diameter: 41mm
Outer Diameter Water Inlet: 23mm
Socket not included
Stainless steel front
Front diameter: 52mm
Sleeve + jet + sealing ring
Embedment area diameter: 26-31mm
Outer diameter of air inlet: 3/8” (10mm)
Outer diameter of water inlet: 3/4” (20mm)
Pressure Range: between 1 and 6 PSI
16A
Compatible with TP740 SQ control panels reference: 57531
9-button model
Manufacturer reference: 860205
Large capacitive touchscreen
Air regulation switch (Venturi)
JACUZZI branded front panel
Suitable for 1" 33mm outer diameter hose
Jacuzzi Ref: 6541-142
Exclusively compatible with Jacuzzi spas
3.0HP - 2200 watts - 730 liters/min - Dual Speed
2 fittings for external diameter 2" (60mm) pipework included
External thread diameter (Suction - Discharge): 78 mm
Pump with AMP plug
Exact replacement for the massage pump WP300II - LX
1" female diameter, 33 mm internal
Compatible with Wellis® brand spas
ABS + Stainless Steel Cap
Cap Diameter: 95mm
Pipe Diameter: 2" (60mm)
Color: white
Entrance/Outlet: 3/4" M with 6 smooth 3/8" outlets
Reference: 672-6970
Allows you to connect a component of your spa to the electronic board
Adaptable to units equipped with a "Mini JJ" socket
Allows you to connect a DIN plug to an RJ-11 socket
Compatible with: KL8600 / KL6600
4-button model
BALBOA Reference: 10418
4-button model
3/4'' ABS Discharge Fitting
In Black ABS, with screw-on grid and sealing gasket.
Connects to a 3/4" pipe (27 mm outer diameter)
Gray version not available.
Model: K-24 or TSC24 - 3 Pumps
Compatible with LFX Californian Dupree Bay Spas
The keypad has 1 connector, unlike the 01580-0001 which has 2
Embedded hole diameter: 44mm
Front diameter: 63mm
Water inlet: 3/4” barbed fitting (27mm)
Air inlet: 3/8” smooth fitting (14.5mm)
Ring and gasket included
Cable Length: 4m
Compatible with Rising Dragon brand lighting
Integrated LED controller board
Connection: AC12V - 2 wires
Front diameter: 70mm
Compatible with various control systems.
S-SPA and M-SPA systems from Gecko use this heater.
ArticSpa A2360-5350ET Spa Heater
Power: 3.6Kw
For ArticSpa brand spas
Maurice Jean R.
Parfait
Rudy G.
Parfaitement adaptable pour mon spa calspa
Rudy G.
Adaptable à la pompe achetée . C’est parfait
Claude B.
Parfait cela correspondait parfaitement à mon besoin.
Claude B.
Parfait cela correspondait parfaitement à mon besoin.
Josef P.
Sehr Gut, passt genau . DANKE
Harold M.
Quelques défauts cosmétiques sur la pièce reçue, mais parfaitement fonctionnelle.
Herve B.
Parfait
Thérèse Marie G.
correspond a ma commande
Patrick L.
Produit conforme à l'original qui datait de 17 ans le prix est conséquent espérons qu'il fonctionne aussi longtemps que celui d'origine