Spare parts (page 52)
3050 products
Compatible with Spas 680 (Hartford and Hawthorne)
2-pump model
5-inch Wave Front Suction Fitting (130 mm) for 2-inch pipe (60mm)
In gray, white, or black ABS, with a screw-on grid and sealing gasket.
Supplied with 2 fittings: Straight and 90° Elbow + sealing gasket and clamping ring.
Front Diameter: 100mm
Length: 113mm
Thread Diameter: 41mm
Outer Diameter Water Inlet: 22mm
Socket not included
Hydroquip® Reference: 33-0025A
Compatible with Hydroquip 9700 series systems
Power: 5.5Kw - Replaces heaters 73790 and 73791
For Hotspring spas manufactured after 2002
Titanium Resistance
Allows transforming a 220V input into a 12V output
Input: 100-240VAC 0.55A - Output: 12V 1.67A
Compatible with all versions of ESPA Wiper3 pump.
ABB Reference: 1SAM250000R1011
Ensures the safety of the spa during electrical fluctuations
Three-phase 7.5 kW
10 - 16A - 690 V AC - 50-60Hz
Used to connect a rib cable (flat) to a MiniDin cable used on the new Sundance keypads
Compatible with Smart System
Manufacturer reference: 4405010437
Dimensions: inner diameter 118 mm x thickness 4 mm
Reference LVJ: L-2207
Front diameter: 85mm
Length: 147mm
Water inlet: 3/4" hose
Connector type: 4-pin DIN male and female
Includes 2 LED lights
Parallel wiring
LVJ Reference: L-2075
Cap Diameter: 110mm x 110mm
Pipe Diameter: 2" (60mm)
Manufacturer reference: pl-41236ss
Face diameter: 87 mm
Nozzle length: 85 mm
Outer diameter of the water inlet: 17 mm
Jet housing not included
Compatible with Sundance® spas from the 850 series after 2001.
1-pump model
Visible face diameter: 50mm
Part height: 72 mm
Connects to a pipe with a 3/4" diameter (27 mm outer diameter)
LVJ Reference: L-2078
Diameter 1" male, outer diameter 33 mm
Suitable for 1" piping.
Compatible with Coleman and MAAX spa skimmers
Dimensions: 220 x 110 x 18 mm
5-inch Wave-Front Suction Fitting (130 mm) for 2-inch (60mm) pipe
In gray, white, or black ABS, with screw-on grid and sealing gasket.
Supplied with 2 fittings: Straight and 90° Elbow + sealing gasket and clamping ring
Model: K-17
Compatible with Dimension One® Chairman II or Nautilus spas
Electronic Board 33-0012A
Hydroquip® Reference: 33-0012A
Compatible with Hydroquip 7500 series systems
ABS Gray or Black
Diameter 1'' (33 mm interior)
Suitable for 1" (33 mm exterior) tubing
Compatible with Coast Spas and AquaDolce spas
Reference BALBOA: 54562
This box allows you to power a filtration pump along with your lighting system.
It also features a programmable timer for the filtration time.
Control Box + Power Supply M29D.
Manufacturer reference: B9300529
Dimensions: 138 x 54 x 20 mm
Heater reference: PFEAT2110000
Sensor reference: 10A546A003
For Ecosoft EB-45 and ET-24 water sterilizers
UV Dose: 30mJ/cm2
Enables disinfection without chemicals
LVJ Reference: L-2076
Diameter 1" female, which is 33 mm interior
Suitable for 1" piping
Dimension One Part Number: 01536-005
Features 9 LEDs for efficient spa lighting, with built-in electrical connector
Connector Type: DIN 4-pin
1 LED light included
Parallel installation
Cable Length: 42 cm
Compatible with Spas 880 and 850 (Marin, Gray, and Maxxus)
2-pump model + Blower
Manufacturer reference: 944530WW
Dimensions: 143 x 127 x 127mm
Pressure Range: between 1 and 5 PSI
25A
Embedment hole diameter in the shell (including gasket): 72mm
Front diameter: 80mm
Water inlet: smooth nozzle 3/4” (20mm)
Air inlet: smooth nozzle 3/8” (10mm)
Gasket not included.
Front diameter: 128mm
Length: 140mm
Thread diameter: 66mm
Outer diameter of water inlet: 25mm
Socket not included
Stainless Steel + Black ABS Front
Directional Jet
Connection to 2" plumbing
"FLO-THRU" type heater
Christophe B.
Je recommande vivement
Alexandre R.
Jamais reçu
Alexandre R.
Jamais reçu
Francois S.
Dommage que les raccords ne soient pas en 50mm
Eric B.
produit conforme à mon souhait
Guy-Claude G.
bien
Eric B.
pas encore installé mais fidèle à mon ancien
Bruno M.
La pompe était très bien emballé avec des protections de qualité. Elle vient juste d etre posée, nous verrons la durée de vie🙏
Laurent B.
RAS.
KARIM M.
Pas le bon model , trop long de plus de 2 cm c inadmissible. Merci