Manufacturer & Expert
7,000+ References
Fast Shipping
Technical assistance
All Major Brands
Pumps (page 5)
270 products
450 Watts + 300W Heating Element + Reduced Noise Option
220/240 Volts - 50/60Hz
Reference: TBS132A
Engages when pressure is maintained
- Single-speed 1.5 HP pump (≈ 1.3 kW) for spa or whirlpool bath
- Pneumatic control with center suction – short body design for compact installation
- HydroAir reference: 22-46671
Hydroair Reference: 22-35421
Pneumatic control
Power: 0.9 HP - 220-240V 50Hz
Union pump outlet fittings 1.5" and socket not included
Connection cable provided
ESPAs Silen S2 75 18M Pump with Prefilter
Single speed
Power 0.75 HP equivalent to 1 kW
- Single-speed 1.5 HP pump (≈ 1.3 kW) for spa or whirlpool bath
- Low suction – short body design for compact installation
- HydroAir reference: 22-4617
Compatible with pumps with a 1" outlet (Tiny might, etc...)
Connects to a 48mm thread pitch
Primarily used in whirlpool bathtubs
Direct import from the USA
Reference: TBS125
Allows to start/stop two devices simultaneously.
300Watts + 300W Heating Element + Reduced Noise Option
220/240 Volts - 50/60Hz
BALBOA Sequential Massage Control Box
Allows control of solenoid valves for sequential massage system
Compatible with references: 11054 and 52501
Compatible with Genesis blowers of 500, 700, 900, and 1200 watts.
Niagara Ultimax Hydro air massage pump
(Balboa USA Group)
Allows for connecting a blower to a 50mm plumbing line.
Circulation Pump 24/7 Laing E10 - 1/15HP
ECM System (Electromagnetic)
Ultra Quiet Pump
Threaded fittings 27 mm (3/4")
Reference: E10-NSTNDNN2W-01 / E10-NSTNNN2W-20 / 73999 / 6050U0014 / LBH07100140
Calspas® references: ELE09903071 or V4001P-DX
One of the most common pumps used in spas sold in France and Europe
Power: 2 HP – 1500 W – 56-frame motor
Outlet fittings, connection cable, and plug not included
Single speed
Power 1HP equivalent to 0.85 Kw
Manufacturer's reference: G50-2HN-S
Genesis Blower with built-in Hydro-Air heating - suitable for 8 to 15 jets
1000 Watts - Heating 300W
220/240 Volts - 50/60Hz
56 frames motor.
Single speed, 2.5HP
Male threaded suction fitting diameter: 78mm (2")
Power: 0.25 HP - 0.18 kW
Max flow rate: 167 liters/minute
1'' 1/2 (48 mm) outlet connections included
Connection cable not provided
Manufacturer reference: AS-620U
Power: 700 W
Power supply: 240 V – 50 Hz
Power of 2.2kW
Can operate continuously
Male/male sleeve for ASD AR-700 blower
allows you to connect the discharge outlet of the ASD AR-700 blower to the union fitting
Amp female plug to connect to the pre-wired Amp Blower
Male Mini JJ plug to be connected to your control box
Spa Massage Pump Viper, 56 frames motor.
Dual speed, 5HP
The Viper pump is typically connected to 2.5'' (74mm) plumbing.
- Poolex Spawer O'Spa 5 kW: heats & cools
- Up to 75% savings compared to a heater
- Built-in Wi-Fi, remote control
- Quiet: < 53 dB at 1 m
- Plug & Play installation, 32/38 mm
Compatible with Genesis blowers 500, 700, 900, and 1200 Watts
Reference: Q-12DS50
Used to detect the flow presence in the circulation system.
Power: 350W
Available in electronic versions
Direct import from the USA
BALBOA reference: 22-7350
- Reversible: heats and cools your spa + automatic defrosting
- Up to 75% savings vs electric heater
- Built-in Wi-Fi, simplified remote control
- Compact, quiet, Plug & Play installation
- Compatible with acrylic spas and Nordic baths
Single speed
Power 0.75 HP or 0.55 Kw
Max. flow rate: 280 L/min
SPECIAL OFFER: Order an EA320 and receive an EA350 instead! Same dimensions, same footprint, but more powerful!
Power : 1HP - 800W
Outputs : 2" (62mm)
Typology : Single speed
Manufacturer's reference : 1713-WC
Replaces identically such pump Koller 1713-WTC in 1HP - 2" fittings
Spa pump Model PISCIS3 50M 0.5HP by ESPA
Single speed
Power 0.5 HP equivalent to 0.37 Kw
Replaces the WIPER0 pump PP04200
Allows for accommodating a control box and a pump.
SpaViper massage pump, 56 frames motor.
Single speed, 5HP
Connections on 94mm threaded male fittings not provided.
The Viper pump is normally connected to 2'' (60mm) plumbing.
Manufacturer reference: G50-2NN-S
Suitable for 8 to 15 jets
Allows for detecting the presence of water flow in the filtration system circuit.
Spa-Flo 1.5HP Dual-Speed Waterway Massage Pump
Power of 1.5Hp equivalent to 1.1 kW
Waterway Reference: MEC80
Pressure Range: between 1 and 5 PSI
25A
Rudy G.
Parfaitement adaptable pour mon spa calspa
Harold M.
Quelques défauts cosmétiques sur la pièce reçue, mais parfaitement fonctionnelle.
Herve B.
Parfait
GILLES G.
C’est un remplacement équivalent au moteur que j’avais qui était monté sur un spa Hot Spring et l’équivalence marche parfaitement bien
Kathia C.
Rien à dire ! Fonctionne très bien
Louis G.
Conforme
Aurelien P.
Top !
Corinne O.
Parfait
Frederic R.
Produit conforme au descriptif et livré rapidement
Gaëlle E.
Très bon produit, en remplacement d'un blower CGair qui poluait le spa car la poussière des charbons se retrouvait dans l'eau.