Pumps (page 4)
274 products
The most common pump used in spas sold in France and Europe
Power: 2 HP – 1500 W – 56-frame motor
Outlet fittings and connection cable + plug not included
Manufacturer's reference: G70-2HN-S
Genesis Blower with integrated heating by Hydro-Air - suitable for 8 to 15 jets
Compatible with Blower genesis 500, 700, 900, and 1200 Watts
Flow Detector Q12
Reference: Q12DS-XX (depending on spa manufacturers)
Allows to detect the presence of flow in the circulation circuit.
Power: 1.2 HP - 900 watts
Max flow rate: 335 liters/min
1'' 1/2 (48 mm) outlet fittings included
With connection cable and AMP plug
Power: 0.75 HP - 550W
Max flow rate: 250 liters/min
1'' 1/2 (48 mm) outlet fittings + connection cable and AMP plug included
Manufacturer references: E10-NSHNDNN2W02 (6080U0019) + Tee: 01710-130
Ultra silent pump
Power: 1/40HP - 60/70W - 220 - 230V 60/50Hz
Max flow rate: 158 liters/min
Connect with hose clamps and flexible piping
AMP plug + Flow Switch cable and tee included
Koller Reference: 240-4643A-J
Power: 3 HP – 2200 W
Maximum flow rate: 1020 liters/min
Pipe fittings not included
Supplied with cable and AMP plug + 1 drain cap included
Allows for connecting a blower to a 40mm piping
Pressure-resistant
Leak-proof
Materials used: PVC+PC+ABS
WATERWAY Reference: 3421621-CE
One of the most common pumps used in spas sold in France and Europe
Power: 2 HP (1.38 kW)
Normally connects to 2'' (60 mm) plumbing
Sold without fittings or cable
Koller Reference: 240-4633A-J
Power: 3 HP – 2200 W – 220-240 V 50 Hz
Maximum flow rate: 1020 liters per minute
Pipe fittings not included
Includes AMP plug + 1 drain cap
The most widely used pump in spas sold in France and Europe
Power: 3 HP – 2250 W – 56-frame motor
Outlet fittings and connection cable + plug not included
Manufacturer reference: G120-2AN-S
Hydro-Air Genesis pneumatic control blower
Suitable for 8 to 15 jets
For spas without electronic control box
Power: 1.5 HP or 1.1 kW
Maximum flow rate 550 liters/minute
Supplied with outlet fittings (63 mm) included
Connection cable without plug not included
ESP 10464 + 10510 + 350 Reference
Compatible with all massage pumps from ESPA brands
Inner thread diameter: 27 mm
Total length: 124 mm
2 ribbed ports - 3/4" M
Greatly reduces the noise from your spa pump.
Compatible with most pumps.
Manufacturer's reference: 672-1780
This pump delivers a high flow rate with remarkable energy efficiency
Power: 1.5 HP
Maximum flow rate: 580 liters per minute
Outlet fittings: 2" (60 mm) – cable not included
Can operate continuously.
Power: 3 HP (2.1 kW)
Outputs: in 2"
2" outlet connections (60 mm) - connection cable and plug not included
Gecko Reference: 08240014-8041
This Gecko pump is optimized for large spas and/or spas with many jets
Power: 3 HP – 230-240 V – 56-frame motor
Outlet fittings: 2.5" (73 mm) and connection cable + AMP plug included
Single speed, 2HP (1.38kW)
Connections on 78mm threaded male fittings.
The Hi Flo pump is normally connected to 2'' (60mm) piping.
Power: 900+180W
Sound volume: <79dB
Gecko Reference: 0800-290001
Power: 3 HP (2.2 kW) – 220-240 V 50 Hz
Maximum flow rate: 475–975 L/min
Includes: fittings for 2" (60 mm) pipes + connection cable with AMP plug
Quiet operation
Power: 1/8 HP – 230 V – 50 Hz – 48-frame motor
Maximum flow rate: 190 liters per minute
Connection: fits 1.5" plumbing – connection cable not included
Allows detecting the presence of water flow in the filtration system
2-wire model
Can operate continuously
- Single-speed 1.5 HP pump (≈ 1.3 kW) for spa or whirlpool bath
- Electric control with center suction – short body design for compact installation
- HydroAir reference: 22-4667
Flow sensor Q-12DS-C2 + 21.50 mm barbed tee
For 3/4 inch flexible hose (outer diameter)
Cables not included
Exclusively compatible with Waterway spas
Exact replacement for the Executive Euro dual-speed 3.2HP pump
3.0HP - 2200 watts - 730 liters/min - Dual-Speed
2 fittings for 2" (60mm) external diameter piping included
External thread diameter (Suction - Discharge): 78 mm
Pump with AMP plug
Exact replacement for the WP300II - LX massage pump
Helps significantly reduce the operating noise of the SKH - Grino Rotamik blower.
Power: 1 HP - 750 watts
Max flow rate: 300 liters/min
Connection to 1.5" (48mm) piping + connection cable and AMP plug provided
Power: 450W
Direct import from the USA
Flow sensor for LX heater.
Compatible with LX brand heaters.
Attaches directly to the heater.
Power: 1.2 HP (0.9 kW)
Maximum flow rate: 335 liters per minute
Includes: 2 outlet fittings 1.5" (48 mm) and connection cable without plug
SPECIAL OFFER: Order an EA390 and receive an EA450 instead! Same dimensions, same footprint, but more powerful!
Can run continuously.
Power of 3kW
Can operate continuously
Can operate continuously
Reduction: Female Threaded 1.5" (63mm) to Male Threaded 70mm
Threaded fitting 2" (60mm) to 63mm F
Inner Thread Diameter: 27 mm
Total Length: 124 mm
2 Ribbed Ports: 3/4" M
1 Ribbed Port: 3/8" M
Helps significantly reduce the operating noise of the SKH - Grino Rotamik blower.
Equipped with a multi-speed rotary knob
Power: 9 to 63 W – 230 V – 50/60 Hz – 2 bar
Connections: smooth ¾"
Cables not included
Alexandre R.
Jamais reçu
Alexandre R.
Jamais reçu
Francois S.
Dommage que les raccords ne soient pas en 50mm
Bruno M.
La pompe était très bien emballé avec des protections de qualité. Elle vient juste d etre posée, nous verrons la durée de vie🙏
Francis B.
Bon rapport qualité prix
Nick K.
Bon rapport qualité prix, on verra avec le temps
Nathalie L.
Livraison rapide. Produit conforme. SAV top qualité.
Philippe S.
Très bon rapport qualité prix
Alain R.
Sitôt reçue et installée tout fonctionne
Baviello M.
Conforme