Pumps (page 2)
312 products
Power: 1.2 HP – 900 W
Maximum flow rate: 335 liters/min
2 outlet fittings 1.5'' (48 mm) included + AMP connection cable
Power: 2.0 HP – 1500 watts
Maximum flow rate: 640 liters/min
Includes 2 fittings for 2'' (60 mm) piping + connection cable with AMP connector
Direct replacement for the massage pump WP200II - LX
Hydroair Reference: 1023024
Power: 1.5 HP (1.3 kW) – 220-240V 50Hz
Supplied with piping fittings + connection cable with AMP connector
This model replaces the ITT Hydroair Magnaflow 440 pump, as its production has been discontinued
Power: 3 HP or 2.2 kW
Connection included for 2'' (60 mm) hose
Delivered without cable
The most common pump used in spas sold in France and Europe
Motor: 56 frame
Power: 3.2 HP – 2480 W
Supplied without outlet fittings and without connection cable or AMP connector
Power: 1.5 HP – 1100W
Maximum flow rate: 380 liters/min
Includes connection for 1.5'' (48 mm) piping + connection cable without plug
SPECIAL OFFER: Don't wait, you will receive a JA200 instead of your JA150!
Blower (air blower) for Aquaspa, Ospazia, Bcool-II, Alton Family, Heperide, Sunbay, Lumix, Infinite Spa...
To be installed inside the motor block.
Reference ESPA 130146 + 127465 + 399
Compatible with ESPA brand pumps
Manufacturer reference: G90-2NN-S
For use with 8 to 15 jets
Power: 0.75 HP – 550 watts
Maximum flow rate: 250 liters/min
Supplied with 2 outlet fittings 1.5" (48 mm) + AMP connection cable
SPECIAL OFFER: Order a JA75 and receive a JA120 instead! Same dimensions, same footprint, but more powerful!
ESPA Reference: PP65805
Power: 0.2 HP (0.15 kW)
Flow rate: 3 m³/hour
Connection for 32 mm or 38 mm piping
Supplied with power cable
Perfectly suited for spas and small above-ground pools up to 38 m³
56 frames motor.
Dual-speed, 3.5HP
Connection for suction on threaded male fitting: 94mm (2"1/2)
Used to detect water flow in the filtration system
Available only with tee
Typically found in a 1-inch (33 mm) air circuit
Connection type: female
Power: 1.5 HP (approximately 1.1 kW)
Maximum flow rate: 520 liters per minute
Supplied with: 2" (60 mm) outlet fittings + AMP plug connection cable
Manufacturer's reference: G90-2HN-S
Genesis Blower with integrated heating by Hydro-Air - suitable for 8 to 15 jets
Quiet and highly reliable
Power: 0.25 HP – 230 V – 50 Hz – 0.8 A
Flow rate: 40 liters per minute
Adjustable pump body
Supplied with AMP cable
Reference Koller: 146-200-WE
Power: 0.27 HP
Maximum flow rate: 210 liters per minute
Pipe fittings not included
Supplied with AMP plug
Power: 2 HP - 1500 watts
Outputs: 1.5" (48mm)
Comes with 1.5" (48mm) outlet fittings + connection cable and AMP plug
Screws into the heater clamp ring
Waterway reference 417-4197
Made of ABS
Reference Sundance Spa®: 6000-125
The quietest on the market
Power: 1/15HP - 60W
Max flow rate: 158 liters/min
To be connected with clamps and flexible piping
With connection cable without plug
Power: 4 HP - 3 kW
Maximum flow rate: 780 liters/min
Included: 2" (60 mm inner diameter) outlet fittings + AMP plug connection cable
Reference WATERWAY 400-5990
Suitable for all filtration and massage pumps.
Manufacturer references: 01512-320E; E10-NSHF2W-21; 6080U0044; E10-NSHFNN2W-20; LHB07100089; E10-NSH NDNN2W02; E10-NSHNNNN2W01
Ultra quiet pump
Power: 1/40HP - 60/70W - 220 - 230V 60/50Hz
Max flow rate: 158 liters/min
To be connected with clamps and flexible piping
With Flow Switch cable and tee included - Available with J&J plug
Suitable for 8 to 20 jets
Available in 2HP version
Reference: Q12DS-XX (depending on spa manufacturers)
Allows for detecting the presence of flow in the circulation system.
Heating blower CG AIR SL0 230 Volts - 50Hz - 5.5 A CG AIR Reference: SL0-6-70-230/50-B2-8 Power cable included
The quietest on the market
Power: 1/40HP - 65W for 240V 60/50Hz
Maximum flow rate: 158 liters/minute
Suitable for 1" (33mm) outer diameter pipes
To be connected with clamps and flexible piping
No plug included
Balboa Reference: 1025002
Durajet pumps are known for their durability and long lifespan
Power: 2 HP (1.5 kW) – 220-240V 50Hz
Cable and fittings not included
Power: 3 HP or 2.2 kW
Maximum flow rate: 730 liters/min
Supplied with outlet fittings for 2'' and 2.5" piping + AMP plug connection cable
Used in SUNSPAS and CANADIAN SPAS hot tubs
220/240 Volts - 50/60Hz
Available in 700W
Thread diameter: 94 mm
Hose connection diameter: 74 mm
Power: 1.5 HP or 1.1 kW
Outlets: 2"
Typology: Two-speed
ESPA Reference: PP04410
Power: 1.7HP (1.25kW)
Reference Sirem: PB1C8024L1B
Delivered with threaded outlet fittings 60mm and 65mm
No connection cable or plug included
Primarily used on Aquamarine spas
Manufacturer Reference: G70-2VH-S
Genesis Blower with built-in heater with Hydro-Air variable speed
for use with 8 to 10 jets - 950W
The most common pump used in spas sold in France and Europe
Power: 3.5 HP – 56 frame motor
Outlet fittings and connection cable not included – without plug
Compatible with KL8600 and KL8800 control systems
Connects to the electronic board
Manufacturer Reference: 0810-690000
Power: 230 W (~0.25 HP)
Maximum flow rate: 320 liters per minute
Cable + AMP plug included
Manufacturer reference: PP04415
Power: 2 HP or 1.5 kW
Maximum flow rate: 650 liters/minute
Supplied with outlet fittings (63 mm)
Connection cable and plug not included
Sirem Reference: PB1C450K1B or 0308000002
Power: 218W
2 outlets of 1.5" (48 mm) included
Used on Aqua Dolce spas
Available in electronic model
Power: 3 HP (2.2 kW) - 230V / 50 Hz / 11.5 A
2" (60 mm) outlet unions not included
AMP plug connection cable included
Single speed
Power 1.5 HP equivalent to 1.1 Kw
240 V - 50 Hz - 5.8 A - IPX5
Max. flow rate: 360 L/min
Alain V.
Très bien
Nathalie N.
Parfait
Alexandre R.
Rien à dire, parfait
Albert F.
matériel parfaitement protégé
Pascal R.
Bonne qualité et bien emballé.
Audrey S.
Bonnes références, l'envoi fut rapide, c'est parfait
Audrey S.
Bonnes références, l'envoi fut rapide, c'est parfait
Eric L.
Très bien
Schwarz A.
Parfait
Christophe C.
Parfait pour remplacer ma pompe de circulation Pac piscine .
