Spare parts (page 2)
3050 products
Manufacturer part number:
BALBOA 33-6350
Allows connection between a 60mm (outer diam.) hose and 60mm (outer diam.)
Connection type: M/F
Power: 3HP - 2200W - 800 L/min - Single-speed
Connection: Male / Female
Orientation: 90°
Pipe Size: 1.5" (48mm)
Connection Type: Female
Pipe Diameter: 2" (60mm)
Reference Laing / Xylem: E14-NSTNDNN2W-05
The quietest on the market
ECM system (electromagnetic)
Power: 220–240 V – 115 W – 50/60 Hz
Maximum flow rate: 158 liters per minute
With AMP plug
Hose fittings not included
Type of connection: Male / Female
Pipe diameter: 2" (60mm)
This pump allows you to manage the filtration of your spa as well as the massage
Power: 2.5 HP or 1.85 kW
Maximum flow rate: 670 liters per minute
2'' (60mm inner diameter) outlet fittings included
With AMP plug connection cable
Adaptable to all filtration and massage pumps of the same diameter.
Thread diameter: 62 mm
For outer diameter pipes of: 50 mm
Connection: Female / Female
Angle: 45°
Pipe Size: 1.5" (48mm)
System allowing to convert from a female to a male threaded outlet.
Length: 98 mm
Front Diameter (Stainless Steel): 85 mm
Thread Diameter: 41 mm
External Diameter of Water Inlet: 17 mm
Socket not included
High-flow filtration pump for spa
Power: 0.35 HP – 250 watts
Maximum flow rate: 240 liters/min
Includes 1.5'' (48 mm) pipe fittings
Power cable with AMP connector
Can be replaced identically by the WCP250G pump
Type of connection: Female / Female
Pipe diameter: 2" (60mm)
Female / Female
Allows connecting two 1/2'' pipes
To be glued with special PVC glue
Total length: 86mm
Outer diameter top: 45mm
Outer diameter bottom: 16mm
Compatible with Mini Storm size Waterway jets
Waterway reference: 218-6930
Outer diameter of water inlet: 16mm
Length of the jet body: 96mm
Ospazia, Aquaspa, Sunbay, Bcool II, Lumix, Infinite Spa...
To be installed inside the motor block.
For spas from 2010
Outer diameter: 33 mm
Inner diameter: 27 mm
LVJ Reference : L-3023
Recess hole diameter: 12-14mm
LED housing inner diameter: 6mm
Connection Type: Female
For Outer Diameter Pipe: 1" (33mm)
White rigid PVC tube for spa, 1" diameter
Outer diameter: 33.5 mm
Price is per linear meter
Allows you to connect your 3/4-inch piping to a 3/4-inch male fitting
Reference WATERWAY: 872-0300
Power: 2.5 HP or 1.85 kW
Maximum flow rate: 600 liters per minute
Delivered with 2" (60 mm internal) output fittings
AMP plug connection cable included
Air Pump for Spa
Power: 400 Watts – 0.5 HP
Voltage: 220/240 Volts – 50/60Hz
Delivered with 2 rings + outlet adapter for 1" (33.5mm) or 32mm outlet
Front Diameter (Stainless Steel): 85 mm
Thread Diameter: 38.5 mm
External Diameter of Water Inlet: 17 mm
Socket not included
Quiet operation
Power: 1 HP – 700 watts
Includes 1 fitting for 1" (33 mm) hoses
Blower with AMP plug
Power: 0.5 HP – 370 watts – 270 liters/min
Maximum flow rate: 270 liters per minute
Includes 2 fittings for 1.5" (48 mm) piping
Pump with AMP plug
Direct replacement for the massage pump JA50 - LX
Double resistance - Increased reliability
To be installed inside the motor block
Power: 1800W
NOT compatible with spas equipped with old single resistance heaters
Compatible with Balboa GS / GL2000 - GL2001 / BP series
Power: 3.0 kW
Included: 2" fitting (60 mm)
Hydroquip Reference: 58118
Can directly replace Balboa heater reference 58107
Waterway Reference 400-5161
Made of high-quality ABS
Waterway reference: 715-9860
Also compatible with 3/8" F hose bib outlets
Reference 715-9890
Reference: TBS135A
Allows turning on/off a device.
5A resistive / 250 VAC - 2A inductive / 250 VAC
Compatible with Peips and Everblue Spas (Esprit series design)
3-pump model
Used to seal a pipe or manifold with a diameter of 1.5 inches (48 mm)
Nozzle face diameter: 44mm
Total length: 65mm
Embedding zone diameter: 22mm
External air inlet diameter: 3/8” (9mm) smooth
Gasket, clamping ring, and socket included
Number of outlets: 6 with 3/4-inch hose barb male fittings LVJ Reference: L-3002
System allowing for transitioning from a female outlet to a ribbed outlet.
Reduction: Male 1.5" (48mm) to Female 1" (33mm)
Length: 70mm
Front Diameter: 57mm
Clip Diameter: 23mm
External Water Inlet Diameter: 14mm
Jet Body Length: 62mm
Socket not included
Christophe B.
Je recommande vivement
Alexandre R.
Jamais reçu
Alexandre R.
Jamais reçu
Francois S.
Dommage que les raccords ne soient pas en 50mm
Eric B.
produit conforme à mon souhait
Guy-Claude G.
bien
Eric B.
pas encore installé mais fidèle à mon ancien
Bruno M.
La pompe était très bien emballé avec des protections de qualité. Elle vient juste d etre posée, nous verrons la durée de vie🙏
Laurent B.
RAS.
KARIM M.
Pas le bon model , trop long de plus de 2 cm c inadmissible. Merci