Spare parts (page 3)

Compatible with PolyStorm size WATERWAY jets
WATERWAY reference: 218-4000

Manufacturer's reference: 6307287
PVC glue (rigid) with very fast socket, Thixotrope, blue.
Allows to garnish the joints
BIDON WITH PINKING POBOUILLON 250 ml

Sealing parts
1" male air inlet

Front diameter: 57mm
Length: 72mm
Thread diameter: 28mm
Outer diameter water inlet: 15mm
Socket not included

Leak Sealer Fix a Leak
Liquid designed to repair leaks in spas and swim spas.

Type of connection: Female / Female
Pipe diameter: 1.5" (48mm)

Type of connection: Female / Female
Pipe diameter: 2" (60mm)

Outer diameter: 21 mm
Inner diameter: 15 mm
The price shown is per linear meter

Circulation pump for Ospazia, Aquaspa, Bcool II, Lumix, Infinite Spa..
To be installed inside the motor block.
For spas from 2010

Pump body for LP and WP series
Compatible with Lx Whirlpool LP200/250/300 and WP300 pumps
LX back flange reference: B436-14

Silent, compact, and easy to install
Power: 0.35 HP – 250 W
Maximum flow rate: 260 liters/min
Includes 2 fittings for 1.5" (48 mm) piping + AMP plug power cable + 4 anti-vibration mounts included.

90° 2'' Rounded Male / Female Elbow
Connection: Male / Female
Orientation: 90°
Pipe Dimension: 2" (60mm)

Adaptable to all filtration and massage pumps of the same diameter.
Thread diameter: 62 mm
Hose connection diameter: 48 mm

Flexible hose for 3/4" spa
Only compatible with American spas
Outer diameter: 27 mm
Inner diameter: 23 mm
Price per linear meter

Power: 0.35 HP – 250 watts
Connections: 1.5" x 1.5"

Front Diameter: 25mm
Screw Thread Diameter: 11.5mm
Length: 36mm
Outer Splines Diameter: 8mm
Gasket and tightening nut included

Air Check Valve LVS for ozonator
This air check valve is installed on the air hose connecting the ozonator to the ozone injector.
 

For Ethink KL8-3 electronic control unit
Allows you to control 3 massage pumps.

Quiet and Low-Vibration Pump
Power: 2.0 HP – 1500 Watts – 220-240V – 50Hz
Maximum Flow Rate: 670 L/min
Includes 2" (Ø 60 mm) connectors
AMP plug cable

This pump model is retrofit, meaning it can replace any other spa pump with the same power rating (HP) and dimensions.

Embedment hole diameter: 37-42mm
Front diameter: 47mm
Water inlet: 3/4” barbed fitting (27mm)
Air inlet: 3/8” barbed fitting (14.5mm)
Socket sold with ring and gasket.

Outer diameter: 50 mm
Inner diameter: 41mm
Price per linear meter

Air pump for spa
Power: 900 Watts – 1.2 HP – 220/240 Volts – 50/60Hz
Supplied with 2 rings + outlet fitting for 1'' (33.5 mm) or 32 mm outlet

Compatible with many spa brands.

Power: 1 HP – 750 watts
Maximum flow rate: 350 liters/min
2 fittings for 1.5'' (48 mm) piping
Pump with connection cable and AMP connector.

Direct replacement for the massage pump DH1.0 - LX

Length: 57 mm
Front diameter: 91 mm
Fixing zone diameter: 54 mm
Manufacturer reference: 10-4820WHT
Jet for BALBOA hydro-massage nozzle

Compatible with Balboa M7 heaters and controls systems
The most common sensor
Reference: 30344

Outer diameter: 32 mm
Price per linear meter

Leak sealer Fix a Leak
Liquid used to repair leaks in spas and swim spas.

This pump can also be used as a filtration pump thanks to its 2 speeds
Power: 3.0 HP – 2200 watts
Maximum flow rate: 730 liters/min
Includes 2 fittings for 2'' (60 mm) piping + connection cable with AMP connector.

Exact replacement for the massage pump WP300II - LX

Electronic board located behind the keyboard included
Keyboard dimensions: 128 mm x 84 mm
Color: red
Compatible with brands: Alton Family, Aquaspa, Bcool 2, Bcool III, Garden Allstore, Hesperide, Sunbay.

Complete Wifi Module IN.Touch 2 GECKO

Special 3/8'' barbed x 1/4'' MPT Adapter
Reference Wateway 672-4350
Made of high-quality ABS